1. Manuals
  2. Brands
  3. Vixen Horns Manuals
  4. Tank Equipment
  5. VXT5000
  6. Installation manual

Vixen Horns VXT5000 Installation Manual

Hide thumbs
1
2
3
4
Table of Contents

Advertisement

Quick Links

Download this manual

BEFORE BEGINNING YOUR INSTALLATION

Read through the instruction guide before getting started with the installation. Professional installation is recommended for
this product.
CONTENTS
 5 Gallon Air Tank
 240 PSI Pressure Gauge
 170-200 PSI Pressure Switch
 250 PSI Safety Valve
 1/4" NPT Wing Style Drain Valve
 1/4" NPT Compression Fitting for 1/4" OD Air Line
 1/4" NPT Hex Head Male Plug
 1/2" NPT Hex Head Male Plug x 2
 1/4" OD Nylon Plastic Hose (6 Feet)
 12mm Thread Sealant Tape (16 Feet)
 Mounting Hardware
Over pressuring the tank beyond the specified maximum working pressure (200 PSI) may result in death or
serious injury.

SAFETY INSTRUCTIONS

 Install all fittings and accessories in the tank before pressurizing the tank.
 Before assembly, use thread sealant on all fitting's threads, then use a wrench to tighten each part. IMPORTANT:
Do not over tighten.
 Tank must be drain frequently. Failure to remove condensation will cause the tank to rust sooner.
 We recommend always to install a drain and safety valves in the tank.
 Always depressurize the tank before servicing or adding accessories.
 Do not use this tank as a breathing device.
 Be sure to pump nothing other than atmospheric air.
 It is important to determine the maximum air pressure for any tool or attachment before using it.
 Make sure your battery ground is detached before you begin the installation.
 Employ equipment for eye protection during drilling operations.

PLANNING YOUR INSTALLATION

 Before beginning the installation, determine each component's spot.
 Confirm you have the proper length of airline and wire.
PAGE 1 of 4
VXT5000
INSTALLATION GUIDE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VXT5000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vixen Horns VXT5000

Summary of Contents for Vixen Horns VXT5000

  • Page 1 VXT5000 INSTALLATION GUIDE BEFORE BEGINNING YOUR INSTALLATION Read through the instruction guide before getting started with the installation. Professional installation is recommended for this product. CONTENTS  5 Gallon Air Tank  240 PSI Pressure Gauge  170-200 PSI Pressure Switch ...
  • Page 2 VXT5000 INSTALLATION GUIDE MOUNTING  Find a convenient mounting location in your vehicle for the air tank. Ensure ports are reachable before drilling any holes.  Mark the location of holes using the mounting bracket of the air tank as a template, and then drill to size.
  • Page 3 VXT5000 INSTALLATION GUIDE DRAIN VALVE  This valve helps you drain the water that can collect in the air tank after long periods of use. REMOVING CONDENSATION:  To remove any condensation which has accumulated inside the tank, bleed the tank’s pressure until it ranges from approximately 5 PSI to 20 PSI.
  • Page 4 VXT5000 INSTALLATION GUIDE MAINTENANCE  Make sure that electrical and fitting connections are regularly inspected, cleaned and tightened when needed.  Make sure mounting screws are regularly tightened if needed.  Drain weekly, to avoid excessive buildup of condensation. SOLUTIONS TO COMMON ISSUES Issue: Loss of pressure of tank.

Table of Contents