Table of Contents
Advertisement
8. Repeater mode
8.1. Installation as a repeater
Use the repeater mode in order to utilise the WLAN
Repeater to extend the range of your wireless
network. This will reduce the data transmission rate of
the wireless network by half as the repeater must also
communicate with the clients and the wireless access
point.
NOTE!
When using the device as a repeater for
the first time, place the repeater as close as
possible to the access point to which it is to
be connected. After successful installation,
you can reposition the repeater where the
signal is to be amplified.
8.1.1.
Installation as a repeater via the
WPS button
The quickest, easiest and most secure way of
establishing a wireless connection between the
repeater and the WLAN router is by using the WPS
button.
22 of 70
Advertisement
Table of Contents
