Download Print this page

Breville Toast & Melt BSG540 Instruction Book page 5

Sandwich press
Hide thumbs Also See for Toast & Melt BSG540:

Advertisement

IMPORTANT
Fully unwind the power
cord from the cord storage
facility before use.
• The installation of a
residual current device
(safety switch) is
recommended to provide
additional safety protection
when using electrical
appliances. It is advisable
that a safety switch with a
rated residual operating
current not exceeding
30mA be installed in the
electrical circuit supplying
the appliance. See your
electrician for professional
advice.
• During electrical storms,
the appliance should be
disconnected from the
power source at the wall
socket to prevent any
electrical surges that may
arise during the storm and
which may inadvertently
cause damage to the
appliance and its electronic
componentry.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
• Always turn the appliance
to the off position, switch
off at the power outlet and
unplug at the power outlet
when the appliance is not
in use.
• Before cleaning, always
turn the appliance to the
off position, switch off at
the power outlet, unplug
at the power outlet and
remove the power cord,
if detachable, from the
appliance and allow all
parts to cool.
• Do not place this appliance
on or near a heat source,
such as hot plate, oven or
heaters.
• Position the appliance at
a minimum distance of
20cm away from walls,
curtains and other heat or
steam sensitive materials
and provide adequate space
above and on all sides for
air circulation.
5

Advertisement

loading

This manual is also suitable for:

Toast & melt bsg520