Table of Contents
Advertisement
Maintaining your appliance
Oven racks
•
If the racks are left in the oven during a self-cleaning cycle, their color will
turn slightly blue and the finish will be dull. After the self-cleaning cycle is
complete and the oven has cooled, rub the sides of the racks with wax paper
or a cloth containing a small amount of oil. This will help the racks glide more
easily on their tracks.
•
Gliding racks may be cleaned by hand with an abrasive cleaner or steel wool.
During cleaning, be careful not to allow water or cleaner to enter the slides on
the sides of rack.
NOTE
•
Do not clean in a dishwasher.
•
If the rack becomes hard to remove or replace, lightly wipe the oven rack
guides with cooking oil. Do not wipe cooking oil on the slides.
•
If the rack becomes difficult to slide, the rack may need to be lubricated using
a graphite lubricant.
•
To order graphite lubricant., call Samsung customer care at
1-800-SAMSUNG (726-7864) or visit our homepage (www.samsung.com/us/
support, www.samsung.com/ca/support, or www.samsung.com/ca_fr/support)
and search for part number DG81-01629A.
•
If you want to buy directly, go to http://www.samsungparts.com.
54 English
To lubricate the slides of the gliding rack
Remove the rack from the oven.
1.
See removing the gliding rack in the
Using the gliding rack section on
page 43.
2.
Fully extend the rack on a table or
countertop. Newspaper may be placed
underneath the rack for easy cleanup.
3.
If there is debris in the slide tracks,
wipe it away using a paper towel. (Any
graphite lubricant wiped away must be
replaced - See steps 4 through 7).
4.
Shake the graphite lubricant before
opening it. Starting with the left (front
and back) slide mechanism of the rack,
place four (4) small drops of lubricant
on the two (2) bottom tracks of the
slide close to the bearing carriers.
Advertisement
Table of Contents
