Easy Maintenance Function - Mitsubishi Electric TRANE TPCA0A 1KA70 Series Instruction Manual

8. Easy maintenance function
Maintenance data, such as the indoor/outdoor unit's heat exchanger temperature and compressor operation current can be displayed with "Smooth maintenance".
* This cannot be executed during test operation.
* Depending on the combination with the outdoor unit, this may not be supported by some models.
1
Service menu: MENU
F1
MENU RETURN SELECT
2
Begin: SELECT
Exit: ON/OFF
3
Ref. address
COMP. current
COMP. run time
COMP. On / Off
COMP. frequency
Return: RETURN
Ref.address
Sub cool
OU TH4 temp.
OU TH6 temp.
OU TH7 temp.
Return: RETURN
Ref.address
IU air temp.
IU HEX temp.
IU filter time
Return: RETURN
en
11
Check menu
Error history
Diagnosis
Smooth maintenance
Request code
Cursor
F2 F3 F4
ON
OFF
HOLD
Smooth maintenance
Ref.address
Stable mode
Cool / Heat/ Normal
Cursor Address
Smooth maintenance
Ref.address
Stable mode
Cool / Heat/ Normal
Stabilization→Collecting
Smooth maintenance
Cool
A
Hr
times
Hz
Page
Smooth maintenance
Cool
7 F
F
55
F
F
Page
Smooth maintenance
Cool
F
5 F
Hr
Page
1
• Select "Service" from the Main menu, and press the [SELECT/HOLD] button.
• Select "Check" with the [F1] or [F2] button, and press the [SELECT/HOLD] button.
• Select "Smooth maintenance" with the [F1] or [F2] button, and press the [SELECT/
HOLD] button.
2 Select each item.
• Select the item to be changed with the [F1] or [F2] button.
• Select the required setting with the [F3] or [F4] button.
"Ref. address" setting .......... "0" - "15"
"Stable mode" setting........... "Cool" / "Heat" / "Normal"
• Press the [SELECT/HOLD] button, fixed operation will start.
* Stable mode will take approx. 20 minutes.
3 The operation data will appear.
The Compressor-Accumulated operating (COMP. run) time is 10-hour unit, and the
Compressor-Number of operation times (COMP. On/Off) is a 100-time unit (fractions
discarded)
Navigating through the screens
• To go back to the Service menu................[MENU] button
• To return to the previous screen .......... [RETURN] button