Advertisement

Quick Links

ENGLISH
Thank you for purchasing this MICHELE watch. The precision and
quality of the quartz movement assures excellent accuracy and
never needs winding.
The following instructions are provided to help you familiarize
yourself with the proper operation and care of your MICHELE
watch. To ensure correct use, please read and follow the
instructions carefully.
All diamonds used on MICHELE watches are genuine diamonds
and sourced from non-conflict areas. The total carat weight and
number of stones are marked on the back of the case.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Deco Park MWW06E000142 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Michele Deco Park MWW06E000142

  • Page 1 ENGLISH Thank you for purchasing this MICHELE watch. The precision and quality of the quartz movement assures excellent accuracy and never needs winding. The following instructions are provided to help you familiarize yourself with the proper operation and care of your MICHELE watch.
  • Page 2: Time Setting

    2 AND 3 HANDS MODELS (RONDA 703, 762, 773, 783, 713, 753, 763, 1069) Minute Minute Hour Hour Seconds Seconds Minute Hour Time Setting 1. Pull crown out to position II. 2. Turn crown clockwise to rotate hour and minute hands to desired time. 3.
  • Page 3 DATE MODELS (RONDA 705, 715, 785) Setting the Time Setting the Date Display 1 Display 2 Display 3 Closed Rotate to set hour & minute II III hands. Date advances with each 24 hour rotation of hour hand. Rapid correction of date Display 1 Display 2 Display 3...
  • Page 4 CHRONOGRAPH MODELS (ETA 251) 1/10 Second Timer 60 Seconds Timer Pusher A II III 30 Minutes Timer Crown (Position I, II, III) Minute Hand Pusher B Second Hand Hour Hand Date Indicator Display 1 Display 2...
  • Page 5: Zero Reset

    Zero Reset Set the hand of the 60 seconds timer to zero II III Crown Set the hand of the Set the hand of the 1/10 second timer to zero 30 minutes timer to zero NOTE: To reset the timer hands (60 seconds hand, 30 minutes hand and 1/10 seconds hand) press Pusher A or B.
  • Page 6: Correction Mode

    Correction Mode Setting the Time Setting the Date Time Zone Correction Rotate to set hour & minute II III hands. Date advances with each 24 hour NOTE: While crown is in position rotation of III, the second hand stops rotating. hour hand.
  • Page 7 Timing Mode Split-time or Intermediate Time Function START 1 SPLIT 1 Read time 1 - 5 minutes Crown - 4 seconds in position l - 6/10 sec. RESTART STOP SPLIT 2 Read Read time 2 Last time - 15 minutes - 25 minutes - 36 seconds - 18 seconds...
  • Page 8: Setting The Time

    CHRONOGRAPH MODELS (ETA G10, G15) Minute Hand Pusher A II III Crown (Position I, II, III) Hour Hand Second Hand Pusher B Date Indicator Setting the Time 1. Pull crown out to position III (the watch stops). 2. Turn crown until you reach correct time. 3.
  • Page 9: Chronograph: Basic Function

    Chronograph • The minute counter measures 30 minutes per rotation. • The center stop-second measures 60 seconds per rotation. 1/10 Second Counter Center Stop-second Pusher A II III Crown Minutes Counter (Position I, II, III) Pusher B PLEASE NOTE: Before using the chronograph functions, please ensure that: - the crown is in position I (= normal position).
  • Page 10: Chronograph: Intermediate Or Interval Timing

    Chronograph: Intermediate or Interval Timing 1. Press pusher A to start the center stop-second hand. 2. Press pusher B to stop the chronograph. *NOTE: Although the chronograph hands have stopped, the movement continues to record the current timing. 3. Make up the measured time: Press pusher B again and the 3 chronograph hands are quickly advanced to the ongoing measured time.
  • Page 11: Chronograph Operation

    CHRONOGRAPH MODELS (ISA 8171/204) Second Hand Chronograph Minute Hand Pusher A II III Crown (Position I, II, III) Chronograph 1/5 Second Hand Pusher B Moonphase Date Indicator Time Setting 1. Pull crown out to position 3. 2. Rotate crown to set correct am/pm time. 3.
  • Page 12 Split Time 1. Press B while the chronograph is running. 2. Press B again to return to the chronograph. 3. Press A to finalize timing. 4. Press B to reset. Chronograph Zero Reset 1. If either of the chronograph hands is not at the zero (12:00) position, pull crown out to position 2.
  • Page 13 CHRONOGRAPH MODELS (ISA 8172/220) Pusher A II III Crown Hour Hand (Position I, II, III) Minute Hand Second Hand Pusher B Date Indicator Display 2 Display 1 Setting the Time 1. Pull crown out to position III (the watch stops). 2.
  • Page 14 Chronograph • The minute counter measures 30 minutes per rotation. • The center stop-second measures 60 seconds per rotation. Seconds Counter Center Stop-second Pusher A II III Minutes Counter Crown (Position I, II, III) Weekday Pusher B PLEASE NOTE: Before using the chronograph functions, please ensure that: - The crown is in position I (= normal position) - The two chronograph hands are precisely at zero position following activation of pusher B.
  • Page 15 Chronograph: Intermediate or interval timing 1. Press pusher A to start the center stop-second hand. 2. Press pusher B to stop the chronograph. *NOTE: Although the chronograph hands have stopped, the movement continues to record the current timing. 3. Make up the measured time: Press pusher B again and the 2 chronograph hands are quickly advanced to the ongoing measured time.
  • Page 16: Chronograph Models

    CHRONOGRAPH MODELS (RONDA 5030.D, 5040.D, 5050.B) 5040.D 5050.B Pusher A II III II III Crown Hour Hand (Position I, II, III) Minute Hand Second Hand Pusher B Date Indicator Date Indicator Setting the Time 1. Pull crown out to position III (the watch stops). 2.
  • Page 17 Chronograph • The minute counter measures 30 minutes per rotation. • The center stop-second measures 60 seconds per rotation. Seconds Counter Center Stop-second Pusher A 5040.D: 30 Minute Counter II III 5050.B: 30 Minute Counter Crown and Hour Counter (Position I, II, III) 1/10 Seconds Counter Pusher B PLEASE NOTE:...
  • Page 18 Chronograph: Intermediate or interval timing 1. Press pusher A to start the center stop-second hand. 2. Press pusher B to stop the chronograph. *NOTE: Although the chronograph hands have stopped, the movement continues to record the current timing. 3. Make up the measured time: Press pusher B again and the 3 chronograph hands are quickly advanced to the ongoing measured time.
  • Page 19: Battery Life

    BATTERY LIFE If your MICHELE timepiece has a chronograph function, you can extend its battery life by ensuring the chronograph function does not run continuously. *NOTE: The chronograph function is in use when the large second hand is in motion.
  • Page 20: Water Resistance

    WATER RESISTANCE All MICHELE timepieces are designed with a minimum water-resistance rating of 5ATM (165ft/50m). See caseback for water resistance rating for traditional watches and Hybrid Smartwatches. The water resistance rating provides guidelines for appropriate water-related exposure to avoid damage to internal watch components. Please see chart for recommended usage guidelines.
  • Page 21 TIMEPIECE CARE AND PRECAUTIONS Each MICHELE timepiece is designed and manufactured to exceed the highest of standards. Unlike most other mechanical objects, a watch operates non-stop. In order to ensure optimal performance and longevity from your timepiece, please review the simple guidelines for care and precautions of your new MICHELE timepiece.
  • Page 22 It is also important to avoid extreme shock or impact. STRAP AND BRACELET CARE At MICHELE we only use first quality materials in making our straps and bracelets. All straps are specifically designed for the watches they fit. Exotic Skins and Textiles The natural material used to manufacture your strap is unique and will vary in texture, pattern, and markings from other straps within the same collection.
  • Page 23 10 ATM or greater. Strap and Bracelet Cleaning All MICHELE straps and bracelets should be wiped with a soft cloth. No chemicals or cleaners should be applied to straps. To maintain the “new look” of metal bracelets, we recommend periodic cleanings with a soft brush and warm soapy water.
  • Page 24 HOW TO CHANGE STRAPS Push metal tab inward until the pin is released. Repeat this process in reverse to re-insert the new strap. *NOTE: The short side of the strap with the buckle should be attached to the 12 o’clock hour. The long side of the strap should be attached to the 6 o’clock hour.
  • Page 25 HOW TO CHANGE BRACELETS Tabs Up Tabs Down Lift up both tabs. Push tabs toward each other to release pin. To re-attach, hold the bracelet against a firm surface, depress the tabs inward, and attach the head.

This manual is also suitable for:

Deco sport mww06k000030Deco day mother mww06p000099

Table of Contents