Table of Contents
Advertisement
MaxiDry function
(depends on the model)
This function enables maximum level drying
performance.
TrayWash Function
(depends on the model)
Select Intensive 70°C programme and
press function key to run this function.
Fast+ Function
(Depends on model)
It shortens the time of the washing cycle
selected and decreases water consumption
by enabling washing under higher pressure.
Tablet detergent function
(depends on model)
Allows to obtain a better drying
performance from the multi-purpose
detergents called as all in one detergents
such as 2in1, 3in1, 4in1, 5in1 and etc.,
depending on the hardness level of the tap
water.
If you have used the Tablet features
during the last washing programme
you used, Tablet function will remain
active in the next washing programme
you will select.
Tablet Detergent function may cause
change in the programme duration.
SelfDry
(Depends on the Model)
Thanks to the "SelfDry" feature on your
machine, the drying effectiveness of your
machine is improved and power is saved.
There are two options, namely "OFF" and
"ON".
You may use sub-menu settings to change
"SelfDry" settings.
When you activate this function, the door
of your machine is opened automatically at
the end of the washing cycle.
30/EN
SelfDry feature opens the door at
the end of the washing cycle thanks
to the "door opening shafts". This
process takes about 2 minutes. Do not
force to close the door if the power is
interrupted while the shafts are moving
out. Operation shall be completed
and shafts shall be retracted when the
power is restored.
SelfDry function may cause changes to
the cycle time.
Changing SelfDry Settings
1. Press Menu key for 3 second after
turning on your machine.
2. Use the <- and +> keys to move to "o:"
position on the screen.
3. Select o:0 or o:1 position using the
selection button, o: 0" position indicates
that the SelfDry feature is off ,"o: 1"
position indicates that it is on.
4. Exit the settings menu by pressing the
menu key. Your settings shall be saved
automatically.
Interior Lighting
(depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
1. After switching on your machine, press
the Settings Menu key for 3 seconds.
In some models pressing the Menu
key only for once will allow you to enter
the Settings menu.
2. Press <- and +> keys to move to the
"L:" position on the display. Select the
position you want with the Selection
key. Interior lighting is off in "L:0"
position and on in "L:1" position.
3. Switch off the machine with the On/Off
key to save the changes.
Advertisement
Table of Contents
