EasySMX VIP002W Quick Start Manual

VIP002W wireless 2.4Ghz gaming headset

Product features:

·Exterior design novel fashion
·Dazzle beautiful decorative lighting
·Adopting high speed optical fiber input
·Carrying virtual 7.1 channels
·Built-in lithium ion battery
·Wired and wireless
·Easy to carry
Product description：
1.
The transmitter: Insert the USB cable in the transmitter. There is no connection state blue lights flash
slowly. Blue light normally on after the connection is successful. Optical fiber connect launch the box.
Optical fiber line at the other end connection PS4 host (the XBOX console). USB micro to provide power
supply for transmitter. No connection status for the blue lights flash slowly. Blue light normally on after the
connection is successful. Use fiber optic link only sound, but microphone no function.
2.
The power button: Press the power button 2 seconds long ding dong. The headset indicator light blue
flash, after the success of the boot automatically paired. Blue light is normally on earphone, Decorative
lights. On the long press 5 seconds switch machine. Automatically closed headphones all light is put out.
3.
The mode switch
the game/virtual 7.1 mode. Press the drops a (prompt) again back to normal sound mode. Loop
transformation function.
4.
The microphone Switch button: Electricity boot default to open the microphone. The microphone white
light is lit. Click on the button the microphone sound dong. The microphone shut down. Light is put out.
The transmitter side lights turn red. Press the button once again and prompt drumming sound two open
the microphone. The white light is lit. The transmitter side lights turn blue. Loop transformation function.
5.
The volume knob: The VOL volume knob counterclockwise. Increase the volume to maximum. The VOL
volume knob clockwise, to reduce the volume to shut down.
6.
Headphones RGB toning rotate button: Will first RGB knob counterclockwise to the end, and then
clockwise. Decorative lighting for pink, yellow, green, blue, purple, red, the automatic cycle gradient. About
the headphones decorative light color synchronization.
7.
Charging status: Insert the charging line. When charging the red light is normally on, and close the
wireless state function and decorative lighting. In the condition of cable, Cable function is normal.
Charging full light is put out. 2.5 hours on a full charge, two battery capacity of 800 mAh. Battery life more
than 8 hours.
button: The default for music mode to electricity. Drop a short press (prompt) to switch to