Table of contents Safety Information .......................4-5 How to Use ........................6 Assembling cleaner ........................6 Using the cleaning head and Accessory Nozzles ................8 Emptying the Dust Chamber .....................10 Operating the cleaner ........................11 Cleaning the Filter ........................12 Cleaning the Exhaust Filter ......................13 User's Guide For Turbine Nozzle(Option) ..................14 Troubleshooting ........................15...
Failure to do so could result in electrical shock or personal cases, contact LG Electronics Service Agent to avoid hazard. injury. • Do not continue to vacuum if any parts appear •...
Page 5
If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch. If the vacuum cleaner still does not run, contact a qualified LG authorised Service Agent.
How to Use Assembling Cleaner Fit the large cleaning head into the end of the tube. NT** NE** Spring latch Telescopic HT** tube HE** The 2 position head Telescopic tube (depending on model) • Press the spring latch to release. Push telescopic tube into nozzle outlet.
Page 7
Head Flexible Hose HT** HE** NT** NE** Attachment Point Button Connecting the flexible hose • Push the end of the head on the flexible hose CAUTION into the attachment point on the vacuum cleaner. • To remove the flexible hose from the vacuum •...
User's Guide for Turbine Nozzle (Feature not available in all countries) Open Open Botton Turbine brush nozzle Air adjustment Slide the air control lever to the right for long pile carpet and to the left for short pile carpet. Cleaning turbine brush nozzle Press the button on the rear side of the nozzle to separate the air cover.
Troubleshooting What to Do When Suction Performance Decreases • Turn off the vacuum cleaner and unplug it. • Check the telecsopic tube, flexible hose and cleaning tool for blockages or obstructions. • Check that the dust chamber is not full. Empty if necessary. •...