Advertisement
2) Click the connect button and confirm "Dialog Box".
3) Click the Config button and Change speed
E2PROM Device setting : over the 350Khz
4) Read and write bin file
Click "(1)Read" tab, and then load download file(XXXX.bin)
by clicking "Read".
5) Click "Auto(2)" tab and set as below
6) Click "Run(3)".
7) After downloading, check "OK(4)" message.
Copyright ©2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3-6. Download Method (By using USB
Memory Stick)
[Caution]
- Using 'power on' button of the control R/C, power on TV.
- USB file (EPK) version must be bigger than downloaded
version of main B/D.
(1) Using 'Power ON' button of the control R/C, Power on TV.
(2) Insert the USB memory stick to the SET.
(3) Display USB loding message then, push the 'Exit' Key of
control R/C
(4) Push the 'MENU' Key and move the cusor 'OPTION' of
OSD ( Fig. 1)
* Caution: Don't push the 'OK' key.Just cusor is on the
'OPTION' menu.
(5) Push the "7" key of control R/C continuously.
Then, Display "TV Software Update" Pop-up menu. (Fig. 2)
- 9 -
( Fig. 1)
( Fig. 2)
LGE Internal Use Only
Advertisement
