Download Print this page

LANSITEC 100-13248 Manual

Smart lorawan bluetooth gateway

Advertisement

Quick Links

Smart LoRaWAN Bluetooth Gateway
Document Number: 990-01201
Rev. 1.73
11/2021
contact@lansitec.com
1. General Introduction
The Bluetooth Gateway is designed based on Bluetooth and LoRa technology. With the advanced LoRa
technology and built-in Bluetooth module, the Bluetooth gateway receives the Bluetooth beacon signals
and reports to the LoRa gateway. The parameter settings, such as the heartbeat period, and LoRa work
mode are adjustable as per customers' requirements.
This document applies to the following products:
Name
Indoor Bluetooth Gateway
Compact Bluetooth Gateway
Solar Bluetooth Gateway
Macro Bluetooth Gateway
2. Abbreviation
ABP: Activation by Personalization
BLE: Bluetooth Low Energy
CRC: Cyclic Redundancy Check
LoRa: Long Range modulation technique
LoRaWAN: LoRa Wide Area Network
OTAA: Over the Air Activation
RSSI: Received Signal Strength Indicator
Product Description
Bluetooth 5.0, 120 x 120 x 31 mm, 5V, triangular
Bluetooth 5.0, 97 x 62 x 7 mm, 600 mAh, 5V
Bluetooth 5.0, built-in antenna, solar, 150 x 90 x 60 mm, 5300 mAh
Bluetooth 5.0, build-in antenna, 150 x 90 x 60 mm, 38000 mAh
1 / 25

Advertisement

loading

Summary of Contents for LANSITEC 100-13248

  • Page 1 Smart LoRaWAN Bluetooth Gateway Document Number: 990-01201 Rev. 1.73 11/2021 contact@lansitec.com 1. General Introduction The Bluetooth Gateway is designed based on Bluetooth and LoRa technology. With the advanced LoRa technology and built-in Bluetooth module, the Bluetooth gateway receives the Bluetooth beacon signals and reports to the LoRa gateway.
  • Page 2: Product Specifications

    Smart LoRaWAN Bluetooth Gateway 3. Product Specifications Table 1: Product Specifications LoRaWAN Protocol Version 1.0.2B Activation Mode OTAA or ABP LoRa Frequency US915, AU915, EU868, EU433, AS920-923, AS923-925, RU864, ID920, KR920, IN865, KZ865, CN470, CN470-Ali LoRa TX power 0 to 20dBm LoRa Sensitivity -139dBm @SF12, BW 125kHz, 434MHz/470MHz...
  • Page 3: Application Information

    AppSKey are stored in the gateway and are necessary for joining a network. Please find DevEUI or DevAddr labeled at the back of the device. Lansitec helps to configure these parameters before shipping, if required. After power is turned on and after it joins the LoRa network, the gateway sends a registration message that includes the gateway's current parameters setting to the Customer Server (CS).
  • Page 4 Smart LoRaWAN Bluetooth Gateway Or CS records the first-time configuration and acknowledges the request. If CS contains some history configuration of the gateway and mismatch occurrs, CS should send the new configuration to the gateway. Thereafter, the gateway updates and starts working with the new parameters.
  • Page 5 Smart LoRaWAN Bluetooth Gateway 4.4 Uplink Message Table 2: Uplink Message Table Message Name Description Type Registration The gateway will send this message once when joined the LoRa network successfully or when a specific command request downlink message is received. Heartbeat The gateway will periodically send this message to confirm the status of the Lora network connection.
  • Page 6 Smart LoRaWAN Bluetooth Gateway 0x04: CN470 This field is reserved by Lansitec and will be configured 0x08: AS923 before shipping. 0x10: EU433 Default value: 0x20: EU868 European market: EU868 0x40: US915 China market: CN470 Southeast Asian market: AS923 American market US915.
  • Page 7 Smart LoRaWAN Bluetooth Gateway POS FIELD Name Value Description 15~0 0~65535 Report interval, unit 5s. 0 means OFF. (Big endian) The default value is 10s. The gateway sends uplink messages containing beacons' info or sensors' data to CS with this interval For indoor or compact gateway, the Bluetooth keeps receiving all the time, and sends the beacon info list at the end of the POS period.
  • Page 8 Smart LoRaWAN Bluetooth Gateway TYPE FIELD Name Value Description TYPE Message type, CS uses it to identify different uplink messages. Version The version of the message type, the current version is 1. VOL FIELD Name Value Description Macro Unit 0.01v, Base 2.50, plus this offset *0.01. Gateway This is the Voltage of the battery.
  • Page 9 Smart LoRaWAN Bluetooth Gateway Name Value Description 15~0 The same CRC16 as calculated in the register message. It can be used for the server to check for a configuration mismatch. 4.4.3 Beacon This chapter describes the Bluetooth beacons that broadcast major and minor instead of MAC. Bytes 1 …...
  • Page 10 Smart LoRaWAN Bluetooth Gateway beacon received and the time message sent. N = (M+1) / 2 Byte0: bit7 bit6 bit5 bit4 | bit3 bit2 bit1 bit0 Beacon0 | Beacon1 Byte1: bit7 bit6 bit5 bit4 | bit3 bit2 bit1 bit0 Beacon2 | Beacon3 …...
  • Page 11 Smart LoRaWAN Bluetooth Gateway Name Value Description 0~100 Battery level in percentage SYSP FIELD Name Value Description SYSP Integer Systolic Pressure DIAP FIELD Name Value Description DIAP Integer Diastolic Pressure CALO FIELD Name Value Description 15~0 CALO Short Number of calories consumed (Unit: Calorie) RSSI FIELD Name...
  • Page 12 Smart LoRaWAN Bluetooth Gateway MAC FIELD Name Value Description 47~0 6 Bytes MAC address LIGHT FIELD Name Value Description 15~0 LIGHT Short Intensity of light. (Unit: Lux) BAT FIELD Name Value Description 1~100 Battery left (Unit: %) RSSI FIELD Name Value Description RSSI...
  • Page 13 Smart LoRaWAN Bluetooth Gateway -2 ~ 2 (Unit: g) Y FIELD Name Value Description 15~0 Short Accelerometer in Y-axis. -2 ~ 2 (Unit: g) Z FIELD Name Value Description 15~0 Short Accelerometer in Z-axis. -2 ~ 2 (Unit: g) BAT FIELD Name Value Description...
  • Page 14 Smart LoRaWAN Bluetooth Gateway 1: Beacon 2: Bracelet 3: Light perception 4: G-Sensor LENGTH 1~15 Message length MSGBODY Name Value Description MSGBODY Refer to chapters 4.4.3, 4.4.4, 4.4.5, 4.4.6 for the details. Below is the priority of the devices to be sent. Figure 1: Beacon List The gateway sends information of 115 bytes at one time.
  • Page 15 Smart LoRaWAN Bluetooth Gateway LoRa Transmit cycle 5 place in this place in this cycle cycle LoRa Transmit cycle 6 Note 1. 0.5 byte is 4 bits. It is the time offset. Refer to the description in the TOFF field. Note 2.
  • Page 16 Smart LoRaWAN Bluetooth Gateway Priority Bluetooth G-Sensor Light alarm Bluetooth Wristband Bluetooth tag Bluetooth tag Beacon 100-00136 100-02198 100-02196 100-02195 16.5 bytes 14.5 bytes 10.5 bytes 5.5 bytes Quantity Received LoRa Transmit cycle 1 Bluetooth Wristband is sent first LoRa Transmit cycle 2 G-Sensor...
  • Page 17 Smart LoRaWAN Bluetooth Gateway 4.4.8 Acknowledgement Bytes Item TYPE MSGID TYPE FIELD Name Value Description TYPE Message type, CS uses it to identify different uplink messages. RESULT 0: success Processes result of any downlink message that needs to be 1: failure acknowledged.
  • Page 18: Mode Field

    Smart LoRaWAN Bluetooth Gateway TYPE FIELD Name Value Description TYPE Message type, the gateway uses it to identify different downlink messages. 0: OFF ADR (Adaptive Data Rate) status. Please keep ADR off. 1: ON Reserved Reserved for future use DR FIELD Name Value Description...
  • Page 19 Smart LoRaWAN Bluetooth Gateway 4.5.4 Command Request Bytes Item TYPE MSGID VALUE TYPE FIELD Name Value Description TYPE Message type; the gateway uses it to identify different downlink messages. COMMAND 0x2: register request 0x2: request the gateway to send the register message. 0x3: device reboot 0x3: reboot the gateway.
  • Page 20 Smart LoRaWAN Bluetooth Gateway Bluetooth receiving duration is 3s in default POS, 10s in default POS, 10s in default Figure 2: POS Field and Receiving Period Bluetooth receiving duration is 3s in default Delay 3s Delay 3s Figure 3: Delay the Receiving Start Time Bluetooth receiving: 5s POS, 10s in default POS, 10s in default...
  • Page 21: Ordering Information

    0~255 The message ID of the corresponding uplink message, e.g., alarm report 4.6 Performance test and work mode Below is a test Lansitec performed for your reference. Beacon transmit interval: 500ms 100 Beacons Distance between beacons and Bluetooth gateway: 2m...
  • Page 22 Smart LoRaWAN Bluetooth Gateway Bluetooth Gateway, 120x120x31mm, AU915, 5V 100-18359 Bluetooth Gateway, Bluetooth 5.0, 120x120x31mm, CN470, 5V 100-18369 Bluetooth Gateway, Bluetooth 5.0, 120x120x31mm, CN470-Ali, 5V 100-18370 Bluetooth Gateway, Bluetooth 5.0, 120x120x31mm, IN865, 5V 100-18469 Bluetooth Gateway, Bluetooth 5.0, 120x120x31mm, KR920, 5V 100-18378 Bluetooth Gateway, Bluetooth 5.0, 120x120x31mm, AS923, 5V 100-18466...
  • Page 23 Smart LoRaWAN Bluetooth Gateway Description Part Number Bluetooth Gateway, built-in antenna, Bluetooth 5.0, 150x90x60mm, EU868, 100-02364 38000mAh Bluetooth Gateway, built-in antenna, Bluetooth 5.0, 150x90x60mm, AS923, 100-02365 38000mAh Bluetooth Gateway, built-in antenna, Bluetooth 5.0, 150x90x60mm, US915, 100-02366 38000mAh Bluetooth Gateway, built-in antenna, Bluetooth 5.0, 150x90x60mm, AU915, 100-02367 38000mAh Bluetooth Gateway, built-in antenna, Bluetooth 5.0, 150x90x60mm, RU864,...
  • Page 24 Smart LoRaWAN Bluetooth Gateway Compact Bluetooth Gateway x 1 Micro USB Charging Cable (1.0m) Lanyard x 1 PVC Sticker x 1 When shipped in batches: Packing list: Compact Bluetooth Gateway x 10 Accessories for each gateway (shipped in another package): 24 / 25...
  • Page 25 Smart LoRaWAN Bluetooth Gateway USB Charger Micro USB Charging Cable Lanyard Sticker 25 / 25...