Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Beta 1937RT
Summary of Contents for Beta 1937RT
- Page 1 1937RT Operation manual and instructions...
- Page 4 OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L’USO OPERATION MANUAL AND INSTRUCTIONS FOR ORBITAL PALM SANDER MANUFACTURED BETA UTENSILI S.P.A. Original documentation drawn up in ITALIAN. CAUTION IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING THE PNEUMATIC TOOL. FAILURE TO COMPLY WITH THE SAFETY STANDARDS AND OPERATING INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.
- Page 5 OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L’USO • Hearing protection • Protective gloves against physical agents • Anti-vibration gloves, to be worn following a specially conducted survey of the daily exposure of the hand-arm system to vibration • Protective mask against physical agents according to the values found in the environmental/industrial hygiene survey - Make sure you are in a safe position, keeping proper balance at all times.
- Page 6 OPERATION MANUAL AND INSTRUCTIONS Using the pneumatic tool on the workpiece generates noise, which may prove harmful to the exposed personnel. A proper phonometric survey is required to determine the personal hearing protective equipment (hearing protection) to use. If a specially conducted survey suggests that the daily exposure to vibration generated from the pneumatic tool exceeds the limit value under the regulations in force in the respective country, anti-vibration gloves must be worn.
- Page 7 OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L’USO TECHNICAL DATA TRIANGULAR PAD 125 x 95 mm RECTANGULAR PAD 100 x 110 mm ORBIT DIAMETER 5 mm FREE SPEED 10000 rpm AIR INLET 1/4” GAS MAXIMUM PRESSURE 6.2 bar MINIMUM INTERNAL HOSE SIZE (ø) 10 mm MEAN AIR CONSUMPTION 180 l/min...
- Page 8 If lubrication is not provided to the line, oil ISO 32 must be periodically poured into the pneumatic tool, through either the air supply hole or the screw (pictures 4-f, 5-f). MAINTENANCE Maintenance and repair jobs must be carried out by trained personnel only. For such jobs, you can contact Beta Utensili S.P.A.’s repair centre through your Beta dealer. DISPOSAL The pneumatic tool, accessories and packaging should be sent to a waste disposal centre, in accordance with the laws in force in your country.
Need help?
Do you have a question about the 1937RT and is the answer not in the manual?
Questions and answers