en Basic operation
13.9 Changing the activated
programme end time
You can repeatedly change the set
and activated programme end time
before starting the programme.
Requirements
¡ The programme is set.
→ "Setting a programme", Page 28
¡ The programme end time is set
and activated.
Press Start / Pause
1.
The activated programme end time
is paused.
Press until the display shows the
2.
required programme end time.
Press Start / Pause
3.
The changed programme end time
is activated.
13.10 Soaking laundry
To soak the laundry, activate the
soaking before the programme start.
Note: Add the detergent for the soak-
ing cycle in compartment I and the
detergent for the main wash in com-
partment II of the detergent drawer.
→ "Detergent drawer", Page 17
Requirements
¡ The laundry is placed in the appli-
ance.
→ "Loading laundry", Page 28
¡ A programme is set.
→ "Setting a programme", Page 28
Press Soak
1.
→ "Buttons", Page 22
Start the programme.
2.
→ "Starting the programme",
Page 29
30
.
.
.
13.11 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Press Start / Pause
1.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 21
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press Start / Pause
5.
13.12 Cancelling the pro-
gramme
Press Start / Pause
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse
– If the water level is high, start
the programme or select a suit-
able programme for draining.
→ "Programmes", Page 23
Remove the laundry.
3.
→ "Unloading the laundry",
Page 30
13.13 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.14 Switching off the appli-
ance
Turn the programme selector to
1.
Off .
.
.
.
programme.