1. Features Czerny-Turner optical design for high resolution & maximum throughput while minimizing stray light & aberrations Dual ruled gratings used for high efficiency ultraviolet to visible wavelength scanning Single output port version Micrometer adjustable slits Utility software and an ActiveX Control file included ...
7ISW151 Monochromator optical design 6. Slits Adjustment This series of monochromators uses micrometer adjustable slits with sharp stainless-steel blades. The narrowest practically achievable width is 10 μm. The slit is 5 mm high and its width can be adjusted from 10 μm to 3 mm.
7. Usage Cable Connection: Connect 9-pin connector of monochromator to the RS232 serial port of computer. Or connect the monochromator to computer by USB line. If you have bought our 7IFW6 filter wheel, please connect 15-pin connector of monochromator ...
communication. During the self-checking, the instrument cannot communicate with computer and the software will prompt the communication was failed. Please exit the software, after self-checking is finished (the sound of rotation is stopped), rerun the software and select the actual RS232 port, the communication will be successful.
9. Utility Software The utility software is included at no extra cost with all models to control both the monochromator/Spectrometer and filter wheel accessory. The utility software provided with the monochromator/Spectrometer includes USB drivers for Windows 7 32-bit and 64-bit operating systems. The software can also control the instrument through an RS232 or USB connection.