Table of Contents
Advertisement
Daily Reference Guide
PROGRAMS TABLE
Program
Eco 50°
- Program is suitable to clean normally soiled table-
ware, that for this use, it is the most efficient program in terms
P1
of its combined energy and water consumption, and that it is
used to assess compliance with the EU Ecodesign legislation.
Auto Intensive 65° -
P2
gram for heavily soiled dishes and pans. Senses the level of so-
Auto Mixed 55° -
for normally soiled dishes with dried
P3
food residues.
Auto Fast 50° -
Automatic program
for normally and lightly soiled dishes.
The everyday cycle that ensures opti-
P4
mal cleaning and drying performance
in a shorter time.
Rapid 45° -
Program is recommended for limited amount of
lightly-soiled dishes with no dried food residues. Does not include
P5
the drying phase.
Delicates 45° -
Program for delicate items, which are more sen-
P6
sitive to high temperatures, for example, glasses and cups.
Good Night 50° -
appliance. Ensures optimal cleaning and drying performance
P7
with the lowest noise emission.
Sanitizing 65° -
additional antibacterial wash. Can be used to perform mainte-
P8
nance of the dishwasher.
Soak -
Use to refresh crockery planned to be washed later. No
P9
detergent is to be used with this program.
Self-Clean 65° -
of the dishwasher, to be carried out only when the dishwasher
P10
is EMPTY using specific detergents designed for dishwasher
maintenance.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and
pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-
bration. The sensor calibration can increase program duration by up to 20 min.
OPTIONS AND FUNCTIONS
OPTIONS can be selected/ deselected, after choosing the program, directly by pressing the corresponding button (if available - the indicator lights up) (see
CONTROL PANEL). If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and beeps will
sound. The option will not be enabled. An option can change time or water or energy consumption for the program.
ZONE WASH 3D - Thanks to the additional power jets this option
provides up to 80% more water power, a more intensive and powerful
wash in the lower rack, in the specific bottom area. This option is
recommended for washing pots and casseroles (Please refer to the 3D loading
section).
HALF LOAD - If there are not many dishes to be washed, HALF LOAD
is used to save water, electricity or time depending on the selected program.
Remember to reduce the amount of detergent.
EXTRA DRY - The higher temperature during the final rinse and the
extended drying phase allows for improved drying. The EXTRA DRY
option results in the lengthening of the wash cycle.
FAVOURITE - The FAVOURITE program may be saved and will be easily
accessible. Find the program using PREVIOUS /NEXT , and then press
the FAVOURITE program button for 3 seconds.
-
DELAY
The start of the program may be delayed for a period of
time between 0:30 and 24 hours.
1. Select the program and any desired options. Press the DELAY button
(repeatedly) to delay the start of the program. Adjustable from 0:30 to 24
hours. Once the 24 hours setting is reached, press the DELAY another time
to deactivate the DELAY function.
2. Close the door and press the START/Pause button. The timer will begin
counting down.
3. Once this time has elapsed, the indicator light switches off and the program
begins automatically.
The DELAY function cannot be set once a program has been started.
WATER TAP CLOSED – Alarm - Flashes, when there is no inlet water or
water tap is closed.
Programs description
Automatic pro-
iling on the dishes and
Automatic program
adjusts the program
accordingly. When the
sensor is detecting the
soil level an animation
appears in the display
and the cycle duration
is updated.
Suitable for night-time operation of the
Normally or heavily soiled crockery, with
Program to be used to perform maintenance
Available
options
*)
-
-
-
-
-
-
-
DESCALE
Alarm - Limescale accumulation was detected on the internal
components of the appliance. Check if the Water Hardness Setting is
at the correct value and salt is present in the salt container (see FIRST TIME
USE), then use a descaling product (WPro brand is recommended) with the
Self-Clean program. After a successful descaling, the icon will stop being
displayed.
If the actions above are not performed, product performance will deteriorate.
DESCALE warning will start blinking and «dES» alarm will appear on the
display. If still no action is taken, the appliance will only allow a certain
number of cycles to be started (indicated during «dES» alarm display)
and then will be BLOCKED to prevent component damage, with only
the Self-Clean program available. Performing a full descaling will unblock
the product. In the case of extremely high amounts of limescale, descaling
may have to be performed twice to be efficient.
ActiveDry - It is a convection drying system which automatically opens
the door during/after the drying phase to ensure exceptional drying
performance every day. The door opens at a temperature that is safe to
your kitchen furniture.
As additional steam protection, specially designed protection foil is added
together with the dishwasher.
To see how to mount protection foil please refer to the INSTALLATION GUIDE.
This feature is active by default, but it is possible to deactivate it in
the "SETTINGS MENU".
SENSING - When the sensor is detecting the soil level an
animation appears in the display (around 20 min.) and the cycle
duration is updated. SENSING is for the level of soiling on the dishes and it
is present for all cycles (excepting Eco) adjusting the program accordingly.
KEYLOCK - A long press (for 3 seconds) of EXTRA DRY button, will acti-
vate the KEYLOCK function. The KEYLOCK function will block the control panel
except for the ON/OFF button. To deactivate the KEYLOCK, long press again.
Energy
Duration
Water
con-
of wash
consumption
program
sumption
(litres/cycle)
(h: min)
**)
(kWh/cycle)
3:30
9.5
0.76
2:25 - 3:10
15.5 - 24.5
1.30 - 1.70
1:20 - 3:00
7.5 - 19.5
0.75 - 1.20
1:00 - 1:50
7.5 - 15.5
0.70 - 1.10
0:30 - 0:40
10.0 - 12.0
0.55 - 0.65
1:40 - 1:50
12.5 - 16.5
0.95 - 1.20
3:50 - 4:10
10.5 - 14.5
0.80 - 1.15
1:55 - 2:10
12.0 - 19.0
1.40 - 1.80
0:12
4.5
0.10
1:15
11.0
1.10
EN
3
Advertisement
Table of Contents
