Table of Contents
Advertisement
DAYLIGHT-SYNC SHOOTING
Set the main
switch
mode
dial
at
the
( V ) positionl.
( V)
appears
on the
LCD
panel. In this
mode, the flash will discharge in both dark and
bright conditions. When a portrait is taken with
the subject in a backlight situation, the front of
the subject may be cast in shadow. In such a case,
use the Daylight-Sync Shooting Mode (Flash-ON
mode) within the flash-effective range to take pic¬
tures. This will ensure that a picture is well ex¬
posed without any shadow. When you wish to
discharge the flash, use this mode. In this mode,
the flash will always discharge.
Notes:
• Make sure that the red lamp in the viewfinder
is lit when the shutter release button is de¬
pressed halfway down before shooting. The red
lamp blinking indicates that the flash is being
charged.
• Make sure you're within the flash effective
range even when you use the built- in flash as a
fill-in flash in daylight. See page 23.
28
With Daylight-Sync
Advertisement
Table of Contents
