Summary of Contents for FastTt Aeria Evo
- Page 1 [Designed for Speed] PDA Adapter Kit (Aeria Evo) INSTALLATION GUIDE www.FastTT.bike FastTT PDA Adapter Kit Installation Guide www.fastTT.bike...
- Page 2 Congratulations on purchasing your FastTT PDA Adapter Kit to fit your Profile Design Aeria Evo base bar! The following instructions will guide you through the installation process. There is one left side and one right side adapter stack in each pack. Each adapter stack includes...
- Page 3 You will need to source the correct length M6 cap head bolts if you add spacers. ADJUSTING BAR ANGLE The FastTT adjustable angled risers provide a wide range of bar angle adjustment from 10° to 25°. To adjust bar angle, remove the bars and loosen the M6 locking bolt in the top block of the riser so that it is snug but still allows for angle adjustment.
- Page 4 • Bolts have been overtightened • No anti-seize thread compound has been used • Bolts have corroded Please reference the appropriate aero bar and adjustable riser installation guides on our website, as follows: FastTT PDA Adapter Kit Installation Guide www.fastTT.bike...
- Page 5 The manufacturer (Bold Horizon Ltd t/a FastTT) assumes no responsibility or liability for any injury, loss or damage caused as a result of using this product under any conditions. FastTT adjustable angled risers are supplied with a 24-month manufacturers defect warranty. Any damage caused by misuse, incorrect installation, modification, accident, or any other cause is not covered by the manufacturer’s warranty.
Need help?
Do you have a question about the Aeria Evo and is the answer not in the manual?
Questions and answers