ATD Tools ATD-5218 Owner's Manual

ATD Tools ATD-5218 Owner's Manual

Grease control valve

Advertisement

Quick Links

ATD-5218
MADE IN MEXICO GREASE CONTROL VALVE
FOR AIR OPERATED CHASSIS PUMP
MAXIMUM RATED PRESSURE – 7500 PSI
INLET: 1/4"NPT(f); Includes Extension Tube and High
Pressure Zerk Coupler
OWNERS MANUAL
RETAIN THIS MANUAL FOR FUTURE REFERENCE TO IMPORTANT WARNINGS AND
OPERATING AND MAINTENANCE INSTRUCTIONS.
PROPER USE AND MAINTENANCE OF THIS EQUIPMENT IS THE RESPONSIBILITY OF THE
OWNER AND/OR OPERATOR.
DO NOT USE THIS EQUIPMENT UNLESS YOU HAVE CAREFULLY READ AND
UNDERSTAND THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL.
! WARNING !
NEVER exceed the stated maximum working pressure of the pump or of the lowest rated component in your
system.
NEVER modify any part of this equipment.
NEVER use combustible gas with this equipment.
NEVER attempt repairs while the system is under pressure.
NEVER attempt to disassemble the equipment while the system is under pressure.
ALWAYS tighten fluid connections before using this equipment
ALWAYS read/follow the fluid manufacturer's recommendations regarding fluid compatibility.
ALWAYS read/follow the fluid manufacturer's recommendations regarding the use of protective clothing
and equipment.
ALWAYS use an air line filter/moisture eliminator at the air inlet for the pump.
ALWAYS use air line lubricator.
REGULARLY check all equipment and repair/replace worn or damaged parts immediately.
FAILURE TO HEED THESE WARNINGS INCLUDING OVERPRESSURIZING,
ALTERING PARTS, USE OF INCOMPATIBLE FLUIDS, MISUSE, OR USE OF
DAMAGED/WORN PARTS MAY RESULT IN EQUIPMENT DAMAGE,
PROPERTY DAMAGE, FIRE, EXPLOSION AND/OR SERIOUS PERSONAL
INJURY.

SAFETY INSTRUCTIONS

Extreme caution should be used when operating this equipment as it generates very high fluid pressure.
Leaks from loose or ruptured components or material from dispensing valve can inject fluid through the skin
causing serious bodily injury and possible need for amputation. Always wear protection to prevent material
splashing onto skin or into eyes.
IMPORTANT: GET EMERGENCY MEDICAL CARE IMMEDIATELY IF ANY FLUID APPEARS TO
PENETRATE THE SKIN! INFORM PHYSICIAN OF EXACTLY WHAT WAS INJECTED. PLEASE
DO NOT TREAT THIS INJURY AS A SIMPLE CUT.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ATD-5218 and is the answer not in the manual?

Questions and answers

Summary of Contents for ATD Tools ATD-5218

  • Page 1 ATD-5218 MADE IN MEXICO GREASE CONTROL VALVE FOR AIR OPERATED CHASSIS PUMP MAXIMUM RATED PRESSURE – 7500 PSI INLET: 1/4”NPT(f); Includes Extension Tube and High Pressure Zerk Coupler OWNERS MANUAL RETAIN THIS MANUAL FOR FUTURE REFERENCE TO IMPORTANT WARNINGS AND OPERATING AND MAINTENANCE INSTRUCTIONS.
  • Page 2 ! WARNING ! – RELIEF PROCEDURE DO NOT EVER point the dispensing valve at another person. DO NOT EVER attempt to stop material from the dispensing valve or a leaking connection with your hand or body. BEFORE EACH USE, check equipment for proper operation and to insure safety devices are in place and working properly.
  • Page 3 COME IN CONTACT WITH ANY BODY PARTS WITH THE NOZZLE TO PREVENT INJURY AVAILABLE MODELS W/ ACC MODEL COUPLNG NUT INLET W/ 62028ME ATD-5258 ATD-5218 12869ME 1/4" NPT(F) W/O 62028ME ATD-5258 ATD82393ME 12869ME 1/4" NPT(F) W/ 62028ME ATD-5258 ATD3050ME 11396ME 3/8"...
  • Page 4 REPAIR PARTS FIGURE “A” ADJUSTING PART # DESCRIPTION CONTROL VALVE: HYDRAULIC COUPLER W/ 5834 EXTENSION ATD-5258 HYDRAULIC COUPLER ROD MAY PROTRUDE 1/32” MIN MOVE 10181 NOZZLE ADAPTER 5/32” MAX 1/16” MAX MOVE 11356 CONTROL VALVE BODY PULL ROD 11362 11363 BALL RETAINER CHECK SEAT 11364...

Table of Contents