Table of Contents
Advertisement
KV-21PS2/21RS22C/21RS50/21RS50C/21SD2 (RM-Y145)
KV-21PM2/21R22/21R22C/21RD2 (RM-Y146)
• REMOVAL OF THE ANODE-CAP
NOTE:
Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon painted on the CRT, after
removing the anode.
• REMOVAL PROCEDURES
0 Turn up one side of the rubber cap in
the direction indicated by arrow ®.
@ Use your thumb to pull the rubber cap
®
firmly in the direction indicated by
arrow (§).
. HOW TO HANDLE AN ANODE-CAP
® Do not use sharp objects which may cause damage to the sur¬
face of the anode-cap.
@ Do not squeeze the rubber covering too hard to avoid damag¬
ing the anode-cap. A material fitting called a shatter-hook ter¬
minal is built into the rubber.
® Do not force turn the foot of the rubber cover. This may cause
the shatter-hook terminal to protrude and damage the rubber.
When one side of the rubber cap sepa¬
rates from the anode button, the anode-
cap can be removed by turning the rub¬
ber cap and pulling it in the direction of
arrow ©.
— 9 —
Advertisement
Table of Contents
