Advertisement
INSTALLATION OPTIONS (MOUNTING KIT)
LT-300 with pole mount
Introduction
The LT-300 Global Navigation Satellite System (GNSS) receiver is
a maritime navigation product from Lars Thrane A/S. The LT-300
GNSS receiver is designed for the leisure as well as the profession-
al maritime markets. The LT-300 GNSS receiver meets all standards
and certification requirements needed for worldwide maritime
navigation equipment.
Performance
The LT-300 GNSS receiver is capable of providing positions with an
accuracy better than 2 meters. The LT-300 GNSS receiver outputs
navigation data (up to 10 Hz): UTC time and date, position, satel-
lite information, ground speed, course over ground and magnetic
variation, in order to give your vessel smooth navigation capa-
bilities. The 72-channel GNSS receiver benefits from advanced
technologies such as:
• Receive and track multiple satellite systems (GPS, SBAS, GLO-
NASS, and BeiDou)
• Support for Satellite-Based Augmentation System (SBAS):
EGNOS, WAAS, and MSAS
The LT-300 GNSS receiver is designed and built for the demanding
and rough environment at sea and with an operational tempera-
ture range from -40⁰C to +55⁰C (-40⁰F to +131⁰F).
Pole mount
LT-300 IN SHORT
• High-performance GNSS receiver with hot start
capability
• UTC time and date, position, satellite information,
ground speed, course over ground, magnetic
variation
• 72-ch. GNSS (GPS/GLONASS/BeiDou) satellite
receiver with SBAS correction
• Simultaneous NMEA 0183 and NMEA 2000
• Configurable NMEA 0183 (enable/disable, talker
ID, output rate)
• Configurable NMEA 2000 termination resistor
(open or terminated)
• Easy configurable NMEA 0183 data rate
(4800 or 38400 baud)
• Each unit is functional tested prior to shipment
• Worldwide maritime certification
LT-300 with roof mount
Installation & Navigation
The LT-300 GNSS receiver is easy to mount on a 1" pole (optional
installation: roof-mount) with a single cable supporting NMEA
0183, NMEA 2000, and power. The LT-300 GNSS receiver can be
configured to either 4800 or 38400 baud (NMEA 0183), and open
or short termination (NMEA 2000). Use the LT-Service Tool for
optional configuration of the LT-300 GNSS receiver. The LT-Service
Tool is a PC program, which may run on any Windows PC.
More than 40 years of experience have been put into the design
and construction of the advanced LT-300 GNSS receiver, with an
exceptional performance and specification level.
Roof mount
Advertisement
