Advertisement
4.4.1. Check that there is suffi cient clearance between the wheel arch and the tyre and then insert bar (C) into the space above the tyre and
drop it down over the top of the tyre ensuring that it is securely hooked over the back. If not, adjust the position of bar (C). Ensure that
the step is level and the vertical parts of the frame are resting securely onto the face of the wheel/tyre.
4.4.2. Adjust the height of the step if necessary.
4.4.3. When using the step be aware of your surroundings. Do not become so engrossed in what you are doing that you forget you are
standing on a step.
4.5.
Removing the step: Remove the step immediately after use and certainly before the vehicle is next used.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any fl uids (if applicable) into approved
containers and dispose of the product and fl uids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifi cations and component parts without
prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
STS01
Issue 2 (H,F)
14/08/23
Advertisement
