Table of Contents
Advertisement
Quick Links
YARA WALL FACED TOILET SUITE
INSTALLATION GUIDE
Please read this installation instruction BEFORE installations. If the product is
not installed in accordance with these instructions by a qualified tradesperson
to a tradesperson standard. Failure to do so, your Arova warranty may be void
and the home owner may have a claim against you (the installer).
BEFORE INSTALLATION:
occurred in transit. If damage has occurred, or a visible defect exists, do not
proceed with intallation, and advise your supplier immediately.
Installation is acceptance of goods.
NO CLAIMS FOR DAMAGES OR INCORRECT PRODUCTS WILL BE
RECOGNISED AFTER INSTALLATION.
!
CAUTION:
Handle with care. Vitreous china can break or chip if the product is handled
carelessly.
INSTALLERS TO COMPLETE
Date Installed:
Installer's Name:
License #:
Business Name:
Phone #:
Product Installed:
Signature:
* Please leave document to home occupier for future reference.
TOOLS REQUIRED FOR INSTALLATION
Tape Measure
Level
Risk of personal injury or product damage.
Safety Glasses
Drill & Bits
Inspect the toilet to ensure that no damage has
Sponge
Screwdriver
Caulking Gun
Pencil
Advertisement
Table of Contents
Summary of Contents for Arova YARA
- Page 1 Please read this installation instruction BEFORE installations. If the product is not installed in accordance with these instructions by a qualified tradesperson to a tradesperson standard. Failure to do so, your Arova warranty may be void and the home owner may have a claim against you (the installer).
- Page 2 TOILET INSTALLATION PRIOR TO INSTALLATION 1. Inspect products for any damages. Within 48 hours of receiving your goods, unpack your Arova product and check for any possible freight damages, missing parts or incorrect items. Contact Arova (info@arova.com.au) in writing immediately with your order number, product code and attach clear images where appropriate.
- Page 3 ‘P’ Trap Installation Push pan onto P bend connector Align and push the pan back to the wall, connecting pan spigot to pan collar. Bucket flush and check for leaks. YARA 67 230mm YARA 62 180mm www.arova.com.au 3 of 5...
- Page 4 Screw inlet hose onto stop tap. Place inlet valve into position within the cistern. Check if the inlet valve is under normal operation. WARNING: DO NOT SUBMERGE HOSE ASSEMBLY INTO WATER AS PER AUSTRALIAN STANDARD AS/NZS 3499 www.arova.com.au 4 of 5...
- Page 5 Fit the lid and test the buttons. Adjust the rods as required. CARE & MAINTENANCE AROVA products are produced from materials that are well suited to the bathroom however all products require cleaning and maintenance to ensure longevity. The toilet seat may be removed for cleaning - press the quick release button and lift up.
Need help?
Do you have a question about the YARA and is the answer not in the manual?
Questions and answers