Advertisement

Water Wiggler
Caution
• Do not immerse plastic battery/motor compartment
in water.
• Do not allow unit to tip over in bird bath.
• Do not use without metal legs installed.
• Do not allow material such as algae, twigs, or
leaves to become attached to the agitator. Such
attachments will shorten battery life significantly.
• Always keep water level at least 1/4" below the
plastic base.
• If battery/motor compartment does become wet:
1. Open unit and remove batteries. Dry batteries with
a towel.
2. Dry battery compartment and motor using hair
dryer.
• Change batteries when unit no longer creates waves.
• This unit will not de-ice water. Remove the batteries
and store the unit during the winter.

Directions

1. Remove the screw in the top of the dome to separate
the dome from the base [figure 1]. Don't lose the
screw.
2. Insert the 3 "U" shaped wire supports into the base
of the unit [figure 2].
Model 4WW
Figure 1
Figure 2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4WW and is the answer not in the manual?

Questions and answers

Summary of Contents for Allied Precision 4WW

  • Page 1 Water Wiggler Model 4WW Caution • Do not immerse plastic battery/motor compartment in water. • Do not allow unit to tip over in bird bath. • Do not use without metal legs installed. • Do not allow material such as algae, twigs, or leaves to become attached to the agitator.
  • Page 2 Water Wiggler. Be sure the unit is secure and will not fall off of this raised support. Figure 5 ALLIED PRECISION INDUSTRIES, INC. Illustrations may not 705 East North Street • Elburn, Illinois 60119 exactly match your unit.

Table of Contents