1. Manuals
  2. Brands
  3. Record Power Manuals
  4. Industrial Equipment
  5. 80003 Coronet Cobra
  6. Original instructions manual

Record Power 80003 Coronet Cobra Original Instructions Manual

Bandsaw scroll guide system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Original Instructions
80003 Coronet Cobra Bandsaw Scroll
Guide System
Version 3.1
May 2023
It is important to register your product as soon as possible in order to receive efficient after
sales support and be entitled to the full 5 year guarantee. Your statutory rights are not
Always wear safety glasses
when using woodworking
equipment.
Developed in
partnership with
To register this product please visit
www.recordpower.info
affected. Please see back cover for contact details.
Always read the instructions
provided before using
woodworking equipment.
Important
For your safety read instructions carefully before
assembling or using this product.
Save this manual for future reference.

Advertisement

Table of Contents
loading

Related Manuals for Record Power 80003 Coronet Cobra

Summary of Contents for Record Power 80003 Coronet Cobra

  • Page 1 Original Instructions 80003 Coronet Cobra Bandsaw Scroll Guide System Developed in partnership with Version 3.1 May 2023 To register this product please visit www.recordpower.info It is important to register your product as soon as possible in order to receive efficient after sales support and be entitled to the full 5 year guarantee.

  • Page 2: Table Of Contents

    Contents Explanation of Symbols Record Power Guarantee General Health & Safety Guidance Additional Health & Safety Guidance for Bandsaws Specifications Contents of the Package Assembly Operation Maintenance 10 Dust Extraction 11 Parts Lists & Diagrams...

  • Page 3: Explanation Of Symbols

    1. Explanation of Symbols THE SYMBOLS AND THEIR MEANINGS SHOWN BELOW MAY BE USED THROUGHOUT THIS MANUAL. PLEASE ENSURE THAT YOU TAKE THE APPROPRIATE ACTION WHEREVER THE WARNINGS ARE USED. Mandatory Instructions Read and fully understand the instruction manual before attempting to use the product Indicates an instruction that requires particular attention Wear protective eyewear...

  • Page 4: Record Power Guarantee

    Distributor (for details of the Authorised Distributor examine the Product; in your country please see your Product manual 1.2.3 if asked to do so by Record Power, its Authorised or check www.recordpower.info for details). The Distributor or Authorised Dealer, you return the claim itself should be made in a letter setting out Product, at your own cost, to Record Power’s...
  • Page 5 Notice This Guarantee applies to all Products purchased from an Authorised Dealer of Record Power within the United Kingdom of Great Britain and Northern Ireland. Terms of Guarantee may vary in other countries – please check with the...

  • Page 6: General Health & Safety Guidance

    3. General Health & Safety Guidance Ensure that you carefully read and fully Customer Service Department. understand the instructions in this manual 4. Familiarise yourself with the machine before assembly, installation and use of this • If you are not thoroughly familiar with the operation product.
  • Page 7 3. General Health & Safety Guidance the feet and the floor surface to ensure the machine is in the presence of flammable liquids, gases or dust. stable. • The presence of high levels of dust created by machining wood can present a risk of fire or explosion. 7.
  • Page 8 3. General Health & Safety Guidance 16. Avoid unintentional starting of the machine • Do not attempt to machine more than one work piece • Most machines are fitted with a no-volt release (NVR) at a time. switch to prevent unintentional starting. If in doubt •...
  • Page 9 3. General Health & Safety Guidance accessories and consumables. • Have defective switches replaced by a qualified person. 31. Warning! • Do not use compressed air to clean the machine. Always use a brush to dislodge dust in places that are •...

  • Page 10: Additional Health & Safety Guidance For Bandsaws

    4. Additional Health & Safety Guidance for Bandsaws Safe Operation • Check that access doors are fully closed and that the latches are secure. 1. Familiarise yourself with the machine • Machining operations using bandsaws have a his- 3. Whilst machining tory of serious accidents.

  • Page 11: Specifications

    5. Specifications Guide bearing groove thickness: 0.67 mm Weight: 1.24 kg Maximum depth of cut (BS300E): 135 mm Maximum depth of cut (BS350S): 175 mm Scroll blade thickness compatibilty: 0.44 mm - 0.65 mm...

  • Page 12: Contents Of The Package

    6. Contents of the Package Lower scroll guide assembly Upper scroll guide assembly Tool post shaft M6 socket head cap screw Lower safety guard A Lower safety guard B...

  • Page 13: Assembly

    7. Assembly Fig 7.1 Upper guide assembly Before carrying out the assembly process, ensure that the machine is isolated and disconnected from the electricity supply. 4 mm hex wrench Removing the Bandsaw Blade from the Machine Fig 7.2 Remove the bandsaw blade from the machine by following the instructions in the main machine manual.
  • Page 14 7. Assembly Remove the guide support from the bandsaw trunnion by Fig 7.5 loosening the M6 socket head cap screw, as shown in Fig 7.5, using a 5 mm hex wrench. The guide support must be removed to allow sufficient space to fit and adjust the lower scroll guide assembly.
  • Page 15 7. Assembly Insert the lower end of the tool post shaft into the 16 mm Fig 7.9 hole within the upper scroll guide block, ensuring that the threaded hole, located at the top of the shaft (Fig 7.9), is facing towards the rear of the guide assembly, whilst also ensuring that the machined flat surface located at the lower end of the shaft is facing towards the M6 set Threaded...
  • Page 16 7. Assembly Insert the top end of the tool post shaft (featuring the Fig 7.13 threaded hole) into the bandsaw tool post, ensuring that Machine the threaded hole is facing the rear of the machine and front that the upper thrust guide bearing is facing the machine front, Fig 7.13.
  • Page 17 7. Assembly lower end of the shaft is facing towards the M6 set Fig 7.17 Tool post screw, Fig 7.17. Machined shaft flat surface Secure the tool post in place by tightening the M6 set screw, Fig 7.18. 16 mm Fitting the Upper Scroll Guide Assembly to the hole Machine Tool Post...
  • Page 18 7. Assembly To secure the tool post shaft into position, fully tighten Fig 7.21 M5 socket the lower M5 socket head cap screw on the machine tool head cap post, then at the rear, thread the M5 socket head cap screw screw, previously removed from the standard bandsaw blade guides, through the threaded hole within the...
  • Page 19 7. Assembly Position guard B to the right-hand side of the lower Fig 7.25 blade guide support as shown in Fig 7.25, and secure in position in the same way. Guard B Fitting the Scroll Blade to the Machine Before fitting the scroll blade ensure that the machine is Connection slot fully de-tensioned.
  • Page 20 7. Assembly Adjusting the Upper Thrust Guide Bearing Left Fig 7.29 and Right Loosen the thrust guide adjustment lock, as shown in Fig 7.29, and rotate the thrust guide side adjustment knob clockwise or anticlockwise to correctly align with the scroll blade, Fig 7.30.
  • Page 21 7. Assembly Adjusting the Lower Thrust Guide Bearing Left Fig 7.33 and Right Thrust guide side Adjust the lower thrust guide bearing in the same way as adjustment knob the upper thrust guide bearing, as shown in Fig 7.33. Tracking the Scroll Blade Rotate the band wheels to check that the blade's position is maintained.
  • Page 22 7. Assembly Location Grooves on the Upper and Lower Thrust Fig 7.37 Guide Bearings Once the blade has been correctly tracked and fully tensioned, the upper and lower thrust guides can be adjusted so that the blade can sit inside 1 of the 3 location grooves on the upper and lower thrust guide bearings, as shown in Fig 7.37 and Fig 7.38.

  • Page 23: Operation

    Remove the faulty component blade. and replace only with genuine Record Power • For best results the blade must be sharp. Damaged or replacement parts. Any electrical components worn blades should always be replaced.
  • Page 24 8. Operation If it is not possible to free the blade using this method, then it may be necessary to cut the blade using suitable side cutters or tin snips. Replace the blade if necessary and ensure that it is correctly tracked and tensioned and that both doors of the bandsaw are fully closed and secured before attempting to restart the machine.

  • Page 25: Maintenance

    9. Maintenance Cleaning the Thrust Guide Bearings Ensure that the 3 thrust guide bearing location grooves are kept free from wood dust. Cleaning the Machine Table Ensure that the machine table is kept clean and free of debris. Using Effective Dust Extraction The use of respiratory protective equipment is recommended to help protect against harmful wood dust.

  • Page 26: Dust Extraction

    CGV386 CamVac Series Large Extractor Record Power Dust Extraction Machines 90 litre capacity, 1 kW twin or triple motor, 0.5 micron Below is a summary of the Record Power range. Please filtration. visit your local stockist or go online for full details.

  • Page 27: Parts Lists & Diagrams

    11. Parts Lists & Diagrams Upper Scroll Guide Assembly UNLESS DIMENS SURFAC TOLERA DRAWN MATERIA No. Code Part Number Description Quantity WEIGHT SA0207 Tool post shaft SA0208 Top guide block SA0210 Thrust adjustment knob 99338 M4 x 12 cheese head SA0209 Thrust guide main shaft 99337...
  • Page 28 11. Parts Lists & Diagrams Lower Scroll Guide Assembly ITEM NO. PART NUMBER DESCR ZA0617 LOWER GUIDE TH LOWER GUIDE TH ZA0618 THRUST GUIDE SI ZA0588 ZA0589 BEARING THRUST GUIDE SI ZA0590 THRUST GUIDE SI ZA0591 KNURLLE ZA0586 BEARIN DIN 625 - 6000 - 8,SI,NC,8_68 DIN 6902-A9.3 DIN EN ISO 7040 -...
  • Page 32 Woodworking Machinery and Accessories Record Power Ltd, Centenary House, 11 Midland Way, Barlborough Links, Chesterfield, Derbyshire S43 4XA Tel: +44 (0) 1246 571 020 Fax: +44 (0) 1246 571 030 www.recordpower.co.uk To register a product and find your local stockist visit...

Table of Contents