Page 2
A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products.
NETWORK TRANSMITTER Unpacking Unpacking Although your IPA-T10 is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation. As with most electronic devices, we strongly recommend you retain the original packaging. In the un- likely event the product must be returned for servicing, the original packaging (or reasonable equivalent) is required.
Overview Overview The IPA-T10 is an integrated network system that provides a transport solution over an automated network infrastructure. By linking complex and extensive systems (PA, SR, VA) with each other, it is possible to play emergency sound sources and transmit various sound sources such as TTS and sched- uler, and control multiple devices through contact points and RS-232C and RS-422 communication.
By turning the control switch, the user can check the desired information. 9. TEST BUTTON AND TEST LED This button is used when checking the equipment or performing a test operation. It operates only when the button is pressed and the corresponding LED is turned on. IPA-T10...
4. AUDIO INPUT TERMINAL This is the terminal for receiving audio signals. ● INPUT GAIN can be adjusted through the PC program. ● Phantom power (+24V) can be turned ON/OFF through PC program. [BALANCED CABLE] [UNBALANCED CABLE] IPA-T10...
Page 8
7. RS-422/485 CONNECTION TERMINAL It is a connection terminal for RS-422/485 communication among R-type receivers. ※When using RS-485, make sure to connect TRX+/TRX+ and TRX- /TRX-. [RS-422] [RS-485] IPA-T10...
Page 9
This is the terminal that connects the equipment to the network. Broadcasting can be controlled via integrated software. ※ For setting method, refer to the integrated software manual. Please download the manual from the website (www.inter-m.net). <100 Base-T> <1G Base-T>...
NETWORK TRANSMITTER Operation Operation ① ② Network IP 192.168.47.45 IPA-T10 0.1.0.0 MASK 255.255.255.0 Pri. INS 192.168.12.190 192.168.1.99 Sec. 0.0.0.0 MAC 00:1d:1d:02:a5:0e ③ Network Pri. RX KB/s 0.00 TX KB/s 0.00 ① This is the standby screen of the device. The model name and network information are displayed.
NETWORK TRANSMITTER Applications Applications Audio(Mic/Line) Audio(Low/High-Z) Data(RS-485,232) Contact Network(UTP) L2 SWITCHING HUB Fire receiver (P Fire signal) CONTROL PC POWER AMPLIFIER MAIN CONTROLLER(IPA-10) SPEAKER LINE MULTI SOURCE PLAYER CHECKER(IPA-R10) (CD-6208) NETWORK TRANSCEIVER(IPA-T10) ATTENUATOR Fire receiver (R/P Fire signal) SPEAKER IPA-T10...
NETWORK TRANSMITTER Specifications Specifications IPA-T10 Audio input sensitivity 0dBV Audio Rated Power (IPA-R10) 0dBV THD (@ Input 1kHz,Output 0dBV) 0.05% or less AUDIO INPUT S/N (@ Input 1kHz,Output 0dBV A-WTD) 75 dB or more Frequency response 20Hz~20kHz Phantom Power +24V...
Page 15
5. In case of fixing by not using the included screws or screws of the same size, or using insufficient number of screws the manufacturer is not responsible for any safety accidents caused by this. Accessories included for fixing the product - Specification: SCREW M5x0.8P, L=12 - Quantity: 4pcs IPA-T10...
To obtain specific warranty information and available service locations contact Inter-M directly or the authorized Inter-M Distributor for your specific country or region.
Page 20
Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).