MP Solutions V3CS Technical Specifications

V3CS
Technical Specifications

Product Description

The V3CS model is an automatic motorised-lift power point with Australian power sockets, USB A, USB C
charging sockets and a wireless charging top. It is designed for the home and office. The built-in electric motor
allows the unit to raise and lower automatically by pressing the button on the lid.
How to open: press and hold the top button for 3 seconds to 'wake up' the unit. Once the top button has lit up,
press it again once to open or close the unit. The unit will automatically go to sleep after some time. This helps
to prevent accidental opening/closing when placing your mobile device on the top for charging.

Features

2x AU Power Sockets, 1x USB-A 1x USB-C (15w)
1.8m Cable with Fitted AU Plug
Accidental Operation Protection: The unit is fitted with an automatic delay timer to prevent accidental
activation of the motor. Press the button on the top of the unit for 2 seconds to enable the motorised
ascent/descent of the unit. This function works to protect both children and animals.
Anti-pinch function: If the unit is obstructed during its descent, the anti-pinch function will reverse the
direction of travel momentarily, and then pause all movement. The operation LED light will flash to indicate
that the anti-pinch function has been activated. When the button at the top of the unit is pressed again, the
unit will fully raise and return to normal operation.
Touch the top button to raise and
lower the unit
Plug & Play - no electrical work
required for installation