ScienTECH 6205SB Product Tutorial

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

IoT Enabled Smart Building

Scientech 6205SB

Product Tutorial

Ver 1.0

Designed & Manufactured by-

An ISO 9001:2008 company

Scientech Technologies Pvt. Ltd.

94, Electronic Complex, Pardesipura, Indore - 452 010 India,

+ 91-731 4211100,

: info@Scientech.bz ,

:www.ScientechWorld.com

Table of Contents

Need help?

Do you have a question about the 6205SB and is the answer not in the manual?

Questions and answers

Summary of Contents for ScienTECH 6205SB

Page 1 IoT Enabled Smart Building Scientech 6205SB Product Tutorial Ver 1.0 Designed & Manufactured by- An ISO 9001:2008 company Scientech Technologies Pvt. Ltd. 94, Electronic Complex, Pardesipura, Indore - 452 010 India, + 91-731 4211100, : info@Scientech.bz , :www.ScientechWorld.com...
Page 2: Table Of Contents
Scientech 6205SB IoT Enabled Smart Building Scientech 6205 IoT Enabled Smart Building Table of Contents Introduction Features Technical Specifications Scope of learning Smart Sensor Gateway Node Details Theory Sensor hardware and connection details Installing CH340G Driver Installing Arduino Software 10. Configuration of IP Camera 11.
Page 3 ● Assignment 9 To make and control events and alarms by fire sensor‟s output. ● Assignment 10 To make a program to control lights of Scientech 6205SB using RFID tags ● Assignment 11 To receive data string wirelessly from Scientech6205SB using Zigbee and Display it in Serial Monitor of Arduino ●...
Page 4 Scientech 6205SB IoT Enabled Smart Building Safety Instructions Read the following safety instructions carefully before operating the product. To avoid any personal injury, or damage to the product, or any products connected to Do not operate the instrument if you suspect any damage within.
Page 5: Introduction
Scientech smart building comes with various sensors. The data from these sensors can be used to generate various events like switching on and off lights, triggering an alarm, providing access to a user using RFID tags and readers.
Page 6: Features
Scientech 6205SB IoT Enabled Smart Building Features ● Platform to learn, explore, and develop IoT skills. ● Three floors with six blocks table top building structure. ● Each block of building with LED lights. ● Arduino software compatible hardware. ●...
Page 7: Technical Specifications
Scientech 6205SB IoT Enabled Smart Building Technical Specifications Microcontroller ATMega2560 Sensors and Actuator connector 10nos. Digital I/O Pins Analog Input Pins UART 2 nos. 1 no. Switch faults 30nos. Test points 30nos. Power Supplies 5V and 3.3V Variable POT 1 no (10K) Switches 3nos.
Page 8: Smart Sensor Gateway Node Details
Scientech 6205SB IoT Enabled Smart Building Smart Sensor Gateway Node Details Scientech 6205SSG Smart Sensor Gateway is an all in one development platform for embedded system and IoT with inbuilt Wi-Fi, XBee, LCD and USB for output of the data as well as plenty of extra GPIO to interface sensors and actuators.
Page 9 Scientech 6205SB IoT Enabled Smart Building Programmable GPIO Pinouts: Pins GPIO Description Pin 1 Analog Pin Pin 2 Analog Pin Pin 3 Digital Pin Pin 4 Digital Pin...
Page 10 Scientech Smart Sensor Gateway comes with a built-in 10K Potentiometer. Power Supplies and Ground 2.1 +5 V DC Supply: Scientech Smart Sensor Gateway is provided with three (3) +5V power supply pins that can be connected using patch cords. 2.2 +3.3V DC Supply: Scientech Smart Sensor Gateway is provided with three (3) +3.3V power supply...
Page 11 Scientech 6205SB IoT Enabled Smart Building Power LED: The status of power supply in Scientech Smart Sensor Gateway can be determined by the status of a built-in LED. The LED is turned “ON” when supply is provided and is otherwise in “OFF” state.
Page 12 LCD Menu Button Pin 3 Down Voltage and Current Meter: Scientech Smart Sensor Gateway is provided with an in-built voltmeter and ammeter for user to enable easy testing and debugging. Voltmeter Range: 0-25V Ammeter Range: 0-10A Values of voltmeter and ammeter are displayed on the panel.
Page 13 Pin 4 Ammeter USB Port: Scientech Smart Sensor Gateway is provided with a USB port which can be used to connect to any system and can also be used for charging. Buzzer: Scientech Smart Sensor Gateway comes with a built-in buzzer that can be connected using patch chord.
Page 14 Scientech 6205SB IoT Enabled Smart Building CN1 and CN2 Box Connectors:...
Page 15 Scientech 6205SB IoT Enabled Smart Building Fault Switches and Test Points Pinout: Switch Pins GPIO GPIO Pin 1 Pin 2 Pin 3 Pin 4 Pin 1 Pin 2 Pin 3 Pin 4 Pin 1 Pin 2 Pin 3 Pin 4...
Page 16 Scientech 6205SB IoT Enabled Smart Building Pin 1 Pin 2 Pin 3 Pin 4 Pin 1 Pin 2 Pin 3 Pin 4 Pin 1 Pin 2 Pin 3 Pin 4 Pin 1 Pin 2 Pin 3 Pin 4 Pin 1...
Page 17 Scientech 6205SB IoT Enabled Smart Building DIN Connector Pinouts:...
Page 18 Scientech 6205SB IoT Enabled Smart Building I2C Pinouts Connector Pins GPIO Button Name Description Connector E Pin 3 Serial DATA Line Pin3 Connector E Pin 2 Serial Clock Line Pin2 Serial Pinouts (UART) Device Arduino Serial Pins GPIO Description RX of Controller...
Page 19: Theory
Scientech 6205SB IoT Enabled Smart Building Theory Scientech 6205 Smart Building Scientech 6205 Smart Building Smart Touch Panel: The built-in touch switch panel in Smart Building is programmed to enable easy user control .It provides the user accessibility and control over various devices such as lights etc.
Page 20 Bulb Holder: Scientech 6205SB comes with a built-in bulb holder. A bulb connected onto this holder can be used to see how variation in touch switch panel‟s configuration affects the intensity of light of the bulb. This variation in the intensity of brightness of bulb can be easily linked to variation of fan speed which is controlled using a regulator.
Page 21 Scientech 6205SB IoT Enabled Smart Building Power Socket: Scientech 6205SB has four (two in front and two at the back of panel) built-in 5 pin power supply sockets DIN Connector Socket: Scientech 6205SB has eight built-in 5 pin power supply with sensor output...
Page 22 Scientech 6205SB IoT Enabled Smart Building LPG Sensor: (MQ6) LPG sensor used in Smart Building is MQ6. This sensor can recognize LPG (propane and butane) and can measure in the range of 200-1000 ppm. The gas sensor utilizes the change in electrical conductivity that occurs when gas contacts the surface of a ceramic semiconductor table.
Page 23 Scientech 6205SB IoT Enabled Smart Building Fire Sensor: Fire sensor is a sensitive circuit that exploits the temperature and smoke sensing capabilities of ordinary signal diode. Fire sensor used in Smart Building is an IR flame sensor. It uses a light receiving element that generates an electric current when a certain wavelength is entered using an infrared sensor.
Page 24 Scientech 6205SB IoT Enabled Smart Building This digital output signal can be used as an actuation signal for alarms. PIR sensor 10. Temperature Sensor: Temperature Sensors measure the amount of heat energy or even coldness that is generated by an object or a system, collects this data and converts the data into understandable form for a device or an observer.Temperature sensor used in Smart...
Page 25 MH-Z19B CO2 sensor Wireless Camera: Scientech 6205 Smart Building comes with a wireless camera which allows user to work and explore the security related aspects of smart building. Wireless camera allows you to watch Full HD 1080P crisp clear live video of the place where it is installed on mobile phones or computer.
Page 26: Sensor Hardware And Connection Details
Scientech 6205SB IoT Enabled Smart Building orientation allowing 360* rotation control by the user. This eliminates the need to install multiple cameras in every direction. Other features of wireless camera include: ● Email alerts with picture straight on mobile app.
Page 27 Scientech 6205SB IoT Enabled Smart Building Pin Mapping ATmega2560 Each of the 54 digital pins on the Mega can be used as an input or output, using pin Mode(),digital Write(), and digital Read() functions. They operate at 5 volts. Each pin can provide or receive 20 mA as recommended operating condition and has an internal pull-up resistor (disconnected by default) of 20-50 k ohm.
Page 28 Smart Building Connection Details: Scientech 6205SB IoT Smart Building consist s of 7 sensors and RFID module which should be connect to Scientech Smart Sensor Gateway as follows: DIN of Scientech 6205...
Page 29: Installing Ch340G Driver
Scientech 6205SB IoT Enabled Smart Building Installing CH340G Driver Initially connect your hardware having CH340 USB to Serial IC to your PC. In the device manager it will show “USB2.0-Serial” (as shown in below figure) which means your CH340 driver has not been installed.
Page 30 Scientech 6205SB IoT Enabled Smart Building Open the setup file and a “Driver Setup” option will open. Just click on the install file. Once installed it will show driver successfully installed. Now go again back to device manager and there you will see that the driver has been successfully been...
Page 31: Installing Arduino Software
(Windows, IOS, or Linux). After your file download is complete, unzip the file and install it. Connect your Scientech SSN board to the laptop using an A to B connector. The green power LED (labeled PWR) should glow.
Page 32 Scientech 6205SB IoT Enabled Smart Building Go to Tools-> Boards and select Arduino/Genuino Mega Go to Tools-> Port and select COM port.
Page 33 Scientech 6205SB IoT Enabled Smart Building Following is the function of each symbol appearing in the Arduino IDE toolbar. A − Used to check if there is any compilation error. B − Used to upload a program to the Arduino board.
Page 34: Configuration Of Ip Camera
Scientech 6205SB IoT Enabled Smart Building Configuration of IP Camera Setup Guide How to setup Wireless device on Android phone Step 1: Connect the power jack to the Wi-Fi camera. Step 2: Camera will play a dingdong sound. Note: If no „dingdong‟ sound heard after powering on the camera, please press the „RESET‟...
Page 35 Scientech 6205SB IoT Enabled Smart Building Step 3: Install aiMegaCam application from play store for D3D camera in your android device.
Page 36 Scientech 6205SB IoT Enabled Smart Building Step 4: Click phone setting-> WLAN/Wi-Fi->Open WLAN/Wi-Fi in phone setting-> Select camera Wi-Fi to connect. Step 5: Make sure that your android device and your camera is connected with same WLAN network. Step 6: Now open the app and click on Add camera.
Page 37 Scientech 6205SB IoT Enabled Smart Building Step 8: After clicking, a window appears to scan the QR code which is provided at the bottom of the device (camera). Step 9: With the successful scanning of QR code, application asks for the Wi-Fi password (Wi-Fi) which you have to connect), enter a valid password and click on „Apply‟...
Page 38 Scientech 6205SB IoT Enabled Smart Building In case a warning window appears regarding the „ding-dong‟ sound simply Step 10: press yes. Step 11: Please let the camera near to the router and your phone and stable network needed. Note: It is mandatory to kept your router and a camera device closer because the...
Page 39 Scientech 6205SB IoT Enabled Smart Building Step 12: The below screen is coming if your device configure properly. Step 13: A camera window is pop up to modify a password of a camera. Click on modify button.
Page 40 Scientech 6205SB IoT Enabled Smart Building Step 14: Set the password and click on Apply button. Step 15: Click on the streaming button to start live view.
Page 41 Scientech 6205SB IoT Enabled Smart Building How to setup wireless device on Desktop Step 1: Open setting->s Network and Internet-> Network and sharing center-> right click on WIFI setting-> go to its properties. Step 2: Double click on internet version protocol 4...
Page 42 Scientech 6205SB IoT Enabled Smart Building Step 3: Click on use the following IP address and fill the empty tabs Step 4: Now open the browser and search www.d3dsecurity.com Click on support-> download Or copy the below link and search on browser For Windows user:https://www.d3dsecurity.com/pub/media/wysiwyg/upload/D3D-...
Page 43 Scientech 6205SB IoT Enabled Smart Building Step 8: Now check your UID number at the bottom of your camera and select the same UID number on D3D Search tool. Step 9: After clicking, a new tab of D3D camera application is open. Now provide the authenticated password (default password: admin) Note: Make sure your Flash program is running on a browser.
Page 44: Quick Guide
Open the file named “Main Code” in the “Assignment Codes” with Arduino ● IDE. ● Connect A to B cable from Scientech 6205 SSG to USB port of your system. Click on “Tools” on the menu bar of Arduino IDE and under “Board:” select ● “Arduino/GenuinoMega or Mega 2560”.
Page 45 Scientech 6205SB IoT Enabled Smart Building Under the “Tools” option in menu bar; go to “Port:” and select the port of the system ● connected to Scientech 6205SSG. Selecting port in Arduino ● Compile and upload the program onto the board.
Page 46 Scientech 6205SB IoT Enabled Smart Building Click on Ports. It will show you the COM Port allotted to your device. ● While performing the assignments make sure that all the Switch Faults are in “off” position. ● Charge the Smart Sensor Gateway using provided power adapter for 3 hours...
Page 47: Assignments
Open file named “Assignment_1_LED_Blink” in Assignment Codes folder on ● the desktop. ● Connect An A to B cable from system to USB port of Scientech 6205SSG. Click on “Tools” on the menu bar of Arduino IDE and under “Board :” select ● “Arduino/Genuino...
Page 48 Now check that the LED on Scientech 6205SSG starts blinking. You can check and modify blinking rate by modifying the “delay()” function in ● the Arduino program. Note: Make sure all the switch faults of Scientech 6205SSG are in “off” state.
Page 49 Follow the same steps as above to test the sensor again. ● Output of the sensor would be a garbage value. ● Voltage at the test point can be checked and displayed on the built-in voltmeter and ammeter display of Scientech 6205 Smart Sensor Gateway.
Page 50: Assignment 2
Scientech 6205SB IoT Enabled Smart Building Assignment 2 Objective: To make ADC and UART program in Arduino. Equipments Required: Hardware:  Scientech 6205SSL Smart Sensor Gateway  USB-A to USB-B cable  DIN connector(5 pin)  PC Software:  Arduino IDE Procedure: Open file named “Assignment_2_ADC_UART”...
Page 51 Arduino and observe the outputs on the terminal. The “0” on the serial monitor denotes 0 volt and “1023” denotes 5 volt. ● Make sure all the switch faults of Scientech 6205SSG are in “off” state. Note: Testing Switch Fault: Turn Switch Fault in “on”...
Page 52: Assignment 3
Scientech 6205SB IoT Enabled Smart Building Assignment 3 Objective: To Program for on board LCD. Equipment Required: Hardware:  Scientech 6205SB Smart Sensor Gateway  USB cable. Software:  Arduino IDE Procedure: Open file named “Assignment_3_LCD” in Assignment Codes folder on the ●...
Page 53 Compile and upload the program onto the board. After Uploading the program you can see “Hello World!” on TFT display. ● Make sure all the switch faults of Scientech 6205SSG are in “off” state. Note: Testing Switch Fault: Turn Switch Fault in “on” state. This obstructs the ADC signal, producing an ●...
Page 54: Assignment 4
Open file named “Assignment_4_PIR_sensor” in Assignment Codes folder on ● the desktop. ● Connect An A to B cable from system to USB port of Scientech 6205SSG. Connect DIN pin „D‟ of Scientech 6205SSG to pin „D‟ of Scientech 6205Smart ● building.
Page 55 Scientech 6205SB IoT Enabled Smart Building Fig 4.1 Connections for PIR sensor Make sure all the switch faults of Scientech 6205SSG are in “off” state. Note: Testing Switch Fault: Turn Switch Fault in “on” state. This obstructs the ADC signal, producing an ●...
Page 56 Open file named “Assignment_5_temperatue_humidity” in Assignment Codes ● folder on the desktop. ● Connect An A to B cable from system to USB port of Scientech 6205SSG. Connect DIN pin „C‟ from Scientech Smart Sensor Gateway to pin „E‟ of ● Scientech 6205Smart building.
Page 57 Scientech 6205SB IoT Enabled Smart Building Fig 5.1 Connections for temperature and humidity sensor Make sure all the switch faults of Scientech 6205SSG are in “off” state. Note: Testing Switch Fault: Turn Switch Fault in “on” state. This obstructs the ADC signal, producing an ●...
Page 58: Assignment 6
_sensor” in Assignment Codes folder on ● the desktop. ● Connect an A to B cable from system to USB port of Scientech 6205SSG. Connect DIN pin „F‟ from Scientech Smart Sensor Gateway to pin „F‟ of ● Scientech 6205Smart building.
Page 59 Scientech 6205SB IoT Enabled Smart Building Fig 6.1 Connections for CO2 sensor Make sure all the switch faults of Scientech 6205SSG are in “off” state. Note: Testing Switch Fault: Turn Switch Fault in “on” state. This obstructs the ADC signal, producing an ●...
Page 60: Assignment 7
● the desktop. ● Connect An A to B cable from system to USB port of Scientech 6205SSG. Connect DIN pin „A‟ from Scientech Smart Sensor Gateway to pin „A‟ of ● Scientech 6205Smart building. This connection is for LPG sensor.
Page 61 Scientech 6205SB IoT Enabled Smart Building Fig 7.1 Connections for LPG, smoke and fire sensor Make sure all the switch faults of Scientech 6205SSG are in “off” state. Note: Testing Switch Fault: Turn Switch Fault in “on” state. This obstructs the ADC signal, producing an ●...
Page 62 Open file named “Assignment_8_relay_lights” in Assignment Codes folder on ● the desktop. ● Connect An A to B cable from system to USB port of Scientech 6205SSG. Connect DIN pin „B‟ from Scientech Smart Sensor Gateway to pin „B‟ of ● Scientech 6205Smart building.
Page 63 Scientech 6205SB IoT Enabled Smart Building Fig 8.1 Connections for smoke sensor for relay control Note: Make sure all the switch faults of Scientech 6205SSG are in “off” state. Testing Switch Fault: Turn Switch Fault in “on” state. This obstructs the ADC signal, producing an ●...
Page 64 Open file named “Assignment_9_fire_horn” in Assignment Codes folder on the ● desktop. ● Connect an A to B cable from system to USB port of Scientech 6205SSG. Connect DIN pin „E‟ from Scientech Smart Sensor Gateway to pin „C‟ of ● Scientech 6205Smart building.
Page 65 Scientech 6205SB IoT Enabled Smart Building Fig 9.1 Connections for fire sensor to control event and alarm Note: Make sure all the switch faults of Scientech 6205SSG are in “off” state. Testing Switch Fault: Turn Switch Fault in “on” state. This obstructs the ADC signal, producing an ●...
Page 66 Scientech 6205SB IoT Enabled Smart Building Assignment 10 Objective: To make a program to control lights of Scientech 6205SB using RFID tags Equipment Required: Hardware:  Scientech 6205SB Smart Sensor Gateway  A to B cable  DIN connector Software: ...
Page 67 Scientech 6205SB IoT Enabled Smart Building Fig 10.1 Connections for controlling lights using RFID tag Make sure all the switch faults of Scientech 6205SSG are in “off” state. Note: Testing Switch Fault: Turn Switch Fault in “on” state. This obstructs the ADC signal, producing an ●...
Page 68 Scientech 6205SB IoT Enabled Smart Building Assignment 11 Objective: To receive data string wirelessly from Smart sensor gateway node using Zigbee and Display it in Serial Terminal of arduino. Equipment Required: A. Hardware:  SS180 Solar Radiation Sensor B. Software: ...
Page 69 Scientech 6205SB IoT Enabled Smart Building Figure 10.1 Selecting board in Arduino  Under the “Tools” option in menu bar; go to “Port:” and select the port of the system connected to Scientech6205SI. Figure 3.2 Selecting port in arduino ...
Page 70 Scientech 6205SB IoT Enabled Smart Building Assignment 12 Objective: To implement an Arduino program to collect the sensors data from Smart Sensor Gateway and send it to free cloud using ESP8266. Equipment Required: Hardware: 1. Scientech 6205SSG Smart Sensor Gateway 2.
Page 71 Scientech 6205SB IoT Enabled Smart Building Fig 12.2 Selecting port in Arduino ● Make sure your computer is connected to internet, open browser and type thingspeak.com in address bar. ● Click on sign up option located right upper site of the webpage.
Page 72 Scientech 6205SB IoT Enabled Smart Building ● Click on New Channel ● Enter Name and Field. You may have multiple Fields depending on number of sensor create multiple fields such as Temperature, Humidity, etc.
Page 73 Scientech 6205SB IoT Enabled Smart Building ● Keep everything else as it is. Blank or default values and click on Save Channel. ● Click on API Key Tab and look for these two fields Write Api Key and Update channel feed line.
Page 74 ● The API key must be copied from thing speak write API key box and pasted as it is in the program. ● Connect DIN pin „C‟ from Scientech Smart Sensor Gateway to pin „E‟ of Scientech 6205Smart building (for temperature and humidity sensor).
Page 75 Scientech 6205SB IoT Enabled Smart Building ● Make sure you have turned on the internet in android mobile. ● Now you can see the data at thingspeak server in form of graph.
Page 76 Scientech 6205SB IoT Enabled Smart Building Connections to collect sensor data and send it to free cloud Make sure all the switch faults of Scientech 6205SSG are in “off” state. Note: Testing Switch Fault: ● Turn Switch Fault in “on” state. This obstructs the ADC signal, producing an abnormal signal at test point.
Page 77 Scientech 6205SB IoT Enabled Smart Building Warranty 1. We guarantee this product against all manufacturing defects for 12 months from the date of sale by us or through our dealers. 2. The guarantee will become void, if The product is not operated as per the instruction given in the Learning Material The agreed payment terms and other conditions of sale are not followed.