LOWES ASH33235B0 Installation Manual

Advertisement

Quick Links

INSTALLATION GUIDE FOR ASH33235B0

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).

TOOLS REQUIRED

CARE AND MAINTENANCE

• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage
the finish.
If you need further assistance email customercare@ashleyharbour.com.

PACKAGE CONTENTS

INSTALLATION

Install Crossbar

Fixture Body
A
x 1

MOUNTING HARDWARE

Wire Connector
CC
x 3

Wiring

White wire from supply
Black (or red) wire from supply
Ground wire from supply
Green ground screw
-
1
of 2 -
Released Date: 2021-10-11
Crossbar
AA
x 1
Mounting Screw
BB
x 2
Outlet Box Screw
DD
x 2
White from fixture
Black from fixture
Ground wire
from fixture

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ASH33235B0 and is the answer not in the manual?

Questions and answers

Summary of Contents for LOWES ASH33235B0

  • Page 1 INSTALLATION GUIDE FOR ASH33235B0 SAFETY INFORMATION Released Date: 2021-10-11 Please read and understand this entire manual before attempting to assemble, install or operate the product. WARNING • RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
  • Page 2 INSTALLATION Install Fixture Body Install Bulb Install the correct bulb referring to fixture markings and/or labels for maximum wattage. Recommended Bulb Type (not included): 100W BULB BASE TYPE BULB TYPE Medium (E26) TYPE A Apply Caulking * Note: Do NOT caulk the bottom of the backplate to allow moisture to escape.

Table of Contents