Trade Show 5G Football Quick Start Manual

1.
For the best coverage, place the kit on a flat stable surface (such as a
tabletop or shelf), near the center of your space, as close as possible to your
devices. Unlatch and open the top cover of the case for air flow.
Do not place the kit in direct sunlight, near a heat source, or inside a metal
box or metal-lined closet. The kit must be placed in an unobstructed location
without walls, pillars, or thick metal objects nearby which could affect the
radio-frequency signals.
2.
Pull out the power cord and plug it into any standard 110V/3A
3-prong electric outlet.
3.
Press the POWER button on the large black TVU router.
The power button's LED should turn solid blue.
Wait 1 minute for the SIM1/SIM2/SIM3 lights to turn solid or
flashing blue, indicating Internet connectivity.
4.
WiFi Connections
Custom
Network Name (SSID):
Password:
or
Default
Network Name (SSID):
Password:
5.
Wired Ethernet Connections (optional):
Connect up to (3) cat5 ethernet cables to the MikroTik router's yellow LAN ports #3-5. The router will
recognize each hard-wired device and issue it a dynamic IP address (DHCP). You can connect laptop
computers, desktop computers, or any device with an RJ45 ethernet port.
To connect an external switch (optional), plug a cat5 ethernet cable into any of the 3 available LAN ports.
Plug this cable into the external switch's WAN port.
5G Football - Quick Start Guide
Guest Network
guest12345