Miele G 7160 Operating Instructions Manual page 98

Hide thumbs Also See for G 7160:
Table of Contents

Advertisement

Problem solving guide
Problem
During the programme
and at the end of the
programme, the display
shows the following
message:
Check spray arms
The dishwasher does
not switch off at the end
of the programme.
The wash items may not
be clean because no
detergent was dis-
pensed. The  Auto-
Dos function is auto-
matically deactivated
during the programme.
98
Cause and remedy
The lower spray arm is blocked or the jets of the
lower spray arm are clogged. The  AutoDos func-
tion is automatically deactivated during the pro-
gramme because the AutoDos detergent outlet can-
not be completely flushed out.
 Switch the dishwasher off and back on again.
Messages appear in the display.
 Perform a rotation check of the lower spray arm
and rearrange the wash items if they are blocking
the spray arm.
 Clean the lower spray arm (see "Cleaning and
care" chapter, "Cleaning the spray arms" section).
 Select OK to confirm each message.
 Start the programme again.

Advertisement

Table of Contents
loading

This manual is also suitable for:

G 7165G 7165 scvi xxl autodosG 7160 scvi autodosG7160scviG7165scvi xxl

Table of Contents