Cooking At High Cook Power - Whirlpool RM288PXV5 Use & Care Manual

I I
NOTE: If food is removed from oven during
KEEP WARM, touch KEEP WARM then CANCEL
to cancel remainder of the time.
When SLOW COOK/SIMMER
ends, "End" will show on the
Display and 4 beeps will
sound. (You can stop the
beeping by opening the
door or by touching
CANCEL.) "End" will remain
on the Display and a re-
minder tone will sound
every 60 seconds (to re-
mind you that food is left in
the oven] until the door is
opened or CANCEL is
touched. The Display will
then show the time of day.
AUTO SENSOR operating hints
l
All Auto Sensor cooking categories have preset Cook Powers.
l
The COOK POWER Indicator Light does not come on during Auto Sensor
cycles.
l
No Cook or Temperature cycles can be used with Auto Sensor cycles.
l
QUICK DEFROST and KEEP WARM may be selected with COOK/REHEAT or
COOK FROZEN only. KEEP WARM is automatic at the end of the SLOW COOK/
SIMMER cycle.
l
PAUSE may be used with COOK/REHEAT or COOK FROZEN only. It will stop the
oven between the first and second part of the cycle. See "Using PAUSE:'
page 30.
l
In COOK/REHEAT and COOK FROZEN "AS-(#)" will show on the Display until
the oven calculates and begins counting down the remaining cooking
time, except 'AS-I" which stops after the first part of the cooking cycle.
l
The AUTO SENSOR Indicator Light goes off at the end of the first part of the
Slow Cook/Simmer cycle.
l
"Err" will show on the Display if the door is opened during the first part of any
Auto Sensor cycle. "Err" will also show on the Display if Auto Sensor malfunc-
tions. Open the door and touch CANCEL to clear the Display. Do not reset
Auto Sensor. The food may over or under cook. To finish cooking food,
estimate the remaining cook time. Reset the oven using the Cook 1 cycle
and approximate Cook Power setting.
Cooking at High Cook Power
DO THIS... THIS HAPPENS...
1.
Put food in the oven
and close the door.
. . q
2.
Touch COOK 1.
The COOK 1 Indicator Light
will come on and the Dis-
play will show four O's
16