Quantum VS1004-NVR Quick Start

VS1004-NVR QUICK START
Quantum's VS1004-NVR is a powerful 1U server designed for rapid network video download and
archiving. Refer to the data sheet at
SURVEILLANCE > VS-NVR Series Network Video Recording Servers
For complete documentation, including pre-installation requirements, refer to the
VS1004-NVR Documentation Center: https://www.quantum.com/VS1004-NVRdocs.
Activate your warranty and register your product with Quantum: www.quantum.com/startup.

Hardware Overview

For descriptions of the components and explanations of the various LED indications, refer to the
System Overview section.

Front

If you contact Quantum Service, you need to
provide the system serial number. It is on a sticker
on top of the server, just above the control panel.
Drive 0
The VS1004-NVR may be delivered with two HDDs
configured in a RAID 1, or with four HDDs configured
in a RAID 10. The boot device is an internal SSD.

Rear

Power Supply
There is a second serial
number on the back of the
server, on the lip immediately
beneath the power supply.
www.quantum.com
Drive 1
Status LEDs
IPMI LAN LAN 2 VGA
USB LAN 1 DVI-I
> PRODUCTS & SERVICES > VIDEO
for more information.
Drive 2
Line Out
Mic In UID Switch
HDMI
Page 1
Drive 3
Reset Button
Power Button