Advertisement
6. Then insert the plug of stand (D) into the wall outlet finally. Your entire tree should now be lit. If
some bulbs do not light or flicker, search for any loose plugs and/or broken, loose or missing bulbs.
Replace bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree.
STORAGE INSTRUCTIONS
1. Remove all ornaments and decorations. For pre-lit trees, first unplug the rotating stand's plug from
the wall outlet.
2. Gather the branches upwards and secure them in place. Then disassemble the tree from the top to the
upper section. Gently lift off the 2 sections and place them into box.
3. Then unplug the bottom section tree's light string adaptor( F) from rotating stand's end cord(C) and put
the bottom section into box. Then disassemble the tree stand and pack into box and tape it shut.
4. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree
to excessive heat or humidity may damage your tree.
TROUBLE SHOOTING TIPS
For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please check to make sure that all plugs are properly connected as shown in Fig.B and the power cord is
plugged into the wall outlet. Refer to assembly guide for instructions.
2. Please check for loose, broken or missing light bulbs and replace as needed.
SPARE PARTS
For pre-lit trees spare bulbs are included. If extra parts are needed, please contact our customer service
center.
HOW TO USE REMOTE CONTROL:
ON/OFF
COLOR
MODE
1.STEADY ON
2.SLOW SPARKLING
3.QUICK SPARKLING
4.SLOW FADE
5.QUICK FADE
6.SLOW GLOW
7.FLASHING
8.COLORSWIT CHING
Remote Control Front
Remote Control Back
WARNING
1. Use only power adaptor supplied with this product, using a different adaptor will damage the lights
and cause fire, electrical shock hazards.
2. FOR INDOOR USE ONLY.
CUSTOMER SERVICE FOR CHRISTMAS TREES
Do Not Return This Product To The Store.
For any questions, assistance, or missing parts, please contact us at 1-844 946 8733
Or visit our website at www.winnerstree.com.
Welcome to email us:
CUSTOMERSERVICE@WINNERSARTS.COM
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
MODEL #:W-1289RT-66KHZ
1: Remote Control Operating Range: 5 meters
2: Remote Control Functions:
Button A: ON/OFF
Button B: COLOR
Button C: MODE
1.STEADY ON
2.SLOW SPARKLING
3.QUICK SPARKLING
4.SLOW FADE
5.QUICK FADE
6.SLOW GLOW
-23A+
7.FLASHING
8.COLOR SWITCHING
3.Remote Control includes 1 piece 23A battery packed
separately with instruction manual.
Customer Name:
Address: (No P.O. Boxes)
City& State:
Zip Code:
Day Phone:
Date Purchased:
Advertisement
