Summary of Contents for USM HIGHTOWER
- Page 1 OWER - OWER SHEAR BLOCK TOWER USER MANUAL Deployment & Maintenance Patent #8094520 SCAN FOR VIDEO SCAN FOR ALL USM VIDEOS...
- Page 2 REMOVE TOWER FROM MOUNT - Using a 5/16” Allen Wrench, remove Block is fully disengaged from the Notch Rings. two ½-13 x 5.0” flat-head bolts. Lift the Shear Block Tower from the USM. REMOVE SHEAR BLOCK - Using a 3/16” Allen Wrench, remove WIPE CLEAN - Once the Shear Block has been removed, use a rag two ¼-20 x 1.375”...
- Page 3 SPEED WRENCH LUBRICATE MOVING PARTS - Using a grease gun inject grease ROTATE WHILE GREASING - Using Speed-Wrench rotate Lead-Screw while injecting grease. Continue injecting until fresh grease is expelled. into the top of the Shear Block Tower through the zerk fitting. REMOVE EXCESS GREASE - Wipe away excess grease.
- Page 4 KEEP FINGERS AWAY. REMOVE BLOCK FRAGMENTS - Ensure there are no remaining fragments of the broken Shear Block between the Notch-Rings. Do not put hands into the space between the Notch-Rings. USE TOOL FOR REMOVAL - Use a tool to remove broken NEVER USE HANDS - Use a tool to remove broken fragments fragments such as a pen or other non metallic tool.
- Page 5 MISALIGNED ALIGN NOTCH RINGS - Align Notch-Rings with the notch in the NOTCHES MISALIGNED - Simply Rotate the X-Pole to align Top-Block using X-Pole Wrench. notches. ROTATE X-POLE - Using the X-Pole Wrench as pictured above, NOTCHES ALIGNED - With the notches aligned you may proceed rotate the X-Pole to align notches as in cell 16.
- Page 6 Always wash and dry the USM after each use. After the unit is dry apply a silicone spray or lubricant that does not make plastic swell. AVAILABLE FROM USM FOR MOUNT SERVICE AND MAINTENANCE ●...
Need help?
Do you have a question about the HIGHTOWER and is the answer not in the manual?
Questions and answers