Winter Wonder Lane 8147-H01480-01 Assembly Instructions

7.5FT (225CM) LED SLIM TREE 8 FUNCTIONS
Thank you for purchasing this prelit tree.Carefully follow the instructions below on how to quickly and easily set up your
new tree.

TREE ASSEMBLY INSTRUCTIONS

1.Before you start to assemble your tree,choose a location near a wall outlet.
2.Assemble the tree stand and place on a level surface.Screw eys bolt through the holes on the tree stand.(See Fig. A)
Fig A-Tree Stand Assembly
3.Each tree section has a letter tag.Please identify all sections before assembling.
4.Since you have the tree sections laid out in alphabetical order, we will start assembling from the bottom up. Locate the
bottom section of the tree.
5.Place the bottom section A into the stand and secure by tightening the eyebolts so that the section stands straight. The
end of the bottom section should fit firmly in the bottom of the stand.Insert light plug into the adapter.
6.Connect section B to Section A ,lights per Fig B2 ,Next connect section C to Section B.lights per Fig. B1
7. Allow branches to fall into place or gently pull up and out.When adjusting branches be sure that all wires are free of
branch hinge.
8.Connect the lights strings as per the color labels indicated in and insert the last plug with green label into the
Fig.B
adapter, and then insert the adapter into the wall outlet.Your entire tree should now be lit.
9.Begin to shape the branches and tips working from the bottom of the tree to the top. Start with the inner branches
closest to the tree trunk.Arrange each branch tip outward from the branch to fill in as much space as possible. Branch
tips will need to be spread in all directions for the tree to look full and thick. Slightly bending the very end of the outermost
tips gives helps the appearance.
10.After shaping the whole tree, step back and take an overall look.The tree should have a full and even appearance.
Additional shaping of some branches may be needed to fill in any gaps and give a uniform look.
The lights has 8 functions :
Combination, In waves ,Sequential ,Slo-Glo,Chasing/Flash,Slow Fade ,Twinkle/Flash,Steady on.
you can change the 8 functions on the adapter. Your tree is now ready to decorate and enjoy!
SKU#:810614470 Mfg No.:8147-H01480-01 1 Made In China