Page 1
Note EX400/500 Firmware Update Version 2.00.3 effective September 2022. IBC Technologies is in the process of changing the EX400/500 fan from the current SIT NG150 to the EMB fan (VG145). This change in fan model requires that the firmware be updated with version 2.00.3 or later to detect and utilize the proper fan curves. IBC Technologies will be...
2. Remove power to the boiler at a wall switch or a breaker. 3. Shut off gas supply to the boiler. Do not drain the boiler unless freezing conditions are expected during this procedure. 4. Allow the boiler to cool down. IBC Technologies Inc. 1-844-432-8422 www.ibcboiler.com - Released Document...
Page 3
8. Use a 3 mm Allen key to remove the three screws connecting the mixing device (C) to the fan; keep these for reinstallation. Remove and discard the fan O-ring that is seated in the groove. IBC Technologies Inc. 1-844-432-8422 www.ibcboiler.com - Released Document...
Page 4
Note Do not remove the USB before the software update has finished as this will cause the update to fail. IBC Technologies Inc. 1-844-432-8422 www.ibcboiler.com - Released Document...
Page 5
3. Check connections for leaks during operation. 4. Reinstall the top service panel to the boiler cabinet. 5. Perform a combustion analysis, and test for proper operation. 6. Reinstall the front cover. IBC Technologies Inc. 1-844-432-8422 www.ibcboiler.com - Released Document...