Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Qettle AS-414
- Page 1 LEAK DETECTOR WITH AUTO SHUT-OFF INSTALLATION & USER GUIDE...
- Page 2 INTRODUCTION TECHINCAL DATA Operating Voltage: 9V DC This guide explains how to install a QETTLE Leak Detector. The guide covers the installation process for installing the Leak Cable Length: 1.5M Detector in conjunction with a new QETTLE system, or when retro- Connections: 1/2”...
- Page 3 THE INSTALLATION PROCEDURE The first steps of the installation will vary depending on whether the Leak Detector is being installed as part of a new QETTLE system installation or whether you are retro-fitting it to an existing installation. Please follow the applicable sections outlined below...
- Page 4 If you are in doubt about what is covered by your guarantee, or wish to discuss a claim, please call please If any part is no longer available, or out of manufacture, Qettle call Qettle on 01603 875 464 Monday to Friday between reserve the right to replace it with a suitable alternative.
Need help?
Do you have a question about the AS-414 and is the answer not in the manual?
Questions and answers
how to tell if the switch is working
@john f ****
To check if the switch on the Qettle AS-414 is working, replace the battery in the Leak Detector. After installing a new 9V battery, the Leak Detector should beep, and both lights on the front should turn on for 3 seconds. If this happens, the switch is functioning correctly.
This answer is automatically generated