Advertisement
Table of Contents
Advertisement
Table of Contents
Summary of Contents for Hasler HJOG 101
- Page 1 HJOG 101 Paper Joggers Part No. 8704794L...
- Page 2 © 2009 Neopost USA Inc. All rights reserved. Limitations of this Document The information presented herein is subject to change. Neopost USA Inc. ASSUMES NO LIABILITY WHATSOEVER FOR ANY LOSSES OR DAMAGES RESULTING FROM USE OF THIS INFORMATION...
- Page 3 TABLE OF CONTENTS HJOG 101 TOPIC PAGE INTRODUCTION SPECIFICATIONS INSTALLATION OPERATION TROUBLESHOOTING © 2009 Neopost USA Inc. All rights reserved...
- Page 4 © 2009 Neopost USA Inc. All rights reserved...
- Page 5 INTRODUCTION Hasler Joggers are used for aligning paper and dissipating static electricity. An electromagnetic assembly pro- duces a vibrating action, which is transmitted to the deck and rack through a system of flex plates. The control assembly consists of a solid-state on-off knob which also serves to control the speed, up to 4,000 vibrations per minute.
- Page 6 OPERATION Place the jogger in its operating location and plug it into a self-governing electrical receptacle. Place paper, envelopes or checks in the jogger bin(s) and turn the power/ speed control knob clockwise to turn the jogger on and adjust speed. The vibration amplitude is changed by turning this knob.
Need help?
Do you have a question about the HJOG 101 and is the answer not in the manual?
Questions and answers