Download
Share
Print this page
  1. Manuals
  2. Brands
  3. T.C.FILTER Manuals
  4. Water Filtration Systems
  5. T.C. 2
  6. Product manual

T.C.FILTER T.C. 2 Product Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Product Manual
T.C. 2/ T.C. 2S/ T.C. DS

Advertisement

loading
Need help?

Need help?

Do you have a question about the T.C. 2 and is the answer not in the manual?

Questions and answers

Summary of Contents for T.C.FILTER T.C. 2

  • Page 1 Product Manual T.C. 2/ T.C. 2S/ T.C. DS...

  • Page 2: Parts And Accessories

    Parts & accessories for mounting screws filter media cleaning tap wall water inlet clean water for mounting screws Installation Guide Use a 3-way pipe to install from the water source. Installation near the raw water tap is most suitable. Additional pipework is needed if the raw water tap is far away from the desired installation site.
  • Page 3 Illustration of installed water filter for mounting screws wall water inlet Corrugated hoses clean water 3-way pipe for mounting screws Activated carbon preperation Soak activated carbon in tap water for at least 30 minutes. Dispose of the water and clean the media with more water until the residue in the water is not visible.
  • Page 4 Middle column (ceramic filter) for T.C. 2S/ DS only cover water faucet o-ring o-ring cap nut ceramic filter Before inserting ceramic filter clean ceramic filter lightly with tap water Warning: Do not drop the ceramic filter. The filter may break.
  • Page 5 Normal operation (filtration) filter media Normal operation cleaning tap (filtration) - open valve A Valve A - close valve B - turn on clean water tap Valve B close clean water tap open Valve position In the case of water having color or odor - Check valve positions - If valve positions are correct, turn on the clean water tap for 2 - 3 minutes (until color and odor disappear) before using...
  • Page 6 Media cleaning with tap (every 1 - 2 months) filter media cleaning tap Valve A Valve B clean water tap Activated carbon cleaning (regeneration) 1. Close valve A 2. Open valve B 3. Turn on the filter media cleaning tap (refer to the fiture above for valves and taps position)
  • Page 7 pour salt water into the ion- exchange resin column filter media cleaning tap Valve A Valve B clean water tap Ion-exchange cleaning (regeneration) 1. Close valve A and valve B 2. Turn on the clean water tap to drain left-over water 3.
  • Page 8 Cleaning ceramic filter remove ceramic filter remove bolts 1. Remove both fastening bolts on the cover of the ceramic filter column 2. Use an abrasive sponge to clean the ceramic filter 3. Clean the ceramic filter with tap water and install it back into the column Warning: Do not use soap or detergent to clean the ceramic filter.
  • Page 9 External method for media cleaning (every 3 - 4 months) Ion-exchange cleaning (regeneration) Ion-exchange cleaning (regeneration) 1. Prepare a container or bucket and put it right under the ion-exchange resin column 2. Remove the end cap nut at the bottom of the ion-exchange resin column 3.
  • Page 10 Activated carbon cleaning (regeneration) 1. Prepare a container or bucket and put it right under the ion-exchange resin column 2. Remove the end cap nut at the bottom of the activated carbon column 3. Clean the media with clean tap water 4.
  • Page 11 Filling filter media 1. Remove the end cap nut at the top of the respective column 2. Close valve A and valve B 3. When filling the filter media, turn on the clean water tap (preferably, fill in ion-exchange resin first) 4.

This manual is also suitable for:

T.c. 2sT.c. ds