Setting The Monitor And Indicator Lamps - Ricoh PENTAX K-1 II Operating Manual

Setting the Monitor and Indicator Lamps

Adjusting the Brightness, Saturation, and
Color of the Monitor
You can set the brightness, saturation, and color adjustment of
the monitor.
1
Select [LCD Display Settings] in the D1 menu
and press D.
The [LCD Display Settings] screen appears.
2
Adjust the brightness,
saturation, and color.
6
Available operations
AB Selects a parameter.
Adjusts the value.
CD
Switches between the color chart display
R
and the image display.
M Resets the adjustment value to the default
setting.
3
Press E.
The D1 menu reappears.
u Caution
• When [Outdoor View Setting] of the D1 menu is set, [LCD
Display Settings] cannot be changed.
100
You can set whether to turn on the lights for the following
D1
camera parts when 8 is pressed.
Set in [Illumination Settings] of the
D2 menu. Selecting [Off] provides no
illumination even when 8 is
pressed.
LCD Display Settings LCD Display Settings
Brightness Level Brightness Level
±0 ±0
Cancel Cancel OK OK
You can set whether to light up the following indicator lamps on
the camera body.
Set in [Indicator Lamps] of the D2
menu.
For [Self-timer], the self-timer lamp
blinks during the countdown for the
drive mode [Self-timer (12 sec.)]. For
[Remote Control], the remote control
receiver lamp blinks during the
standby for shooting.
Specifying the Illumination Button
Settings
LCD Panel Off, Low, High
Backside Controls Off, Low, High
Lens Mount Off, On
Card Slot/Connector Off, On
Setting the Illumination of the Indicator
Lamps
Wi-Fi Off, Low, High
GPS Off, Low, High
Self-timer Off, On
Remote Control Off, On
D2
Illumination Settings Illumination Settings
LCD Panel LCD Panel
Backside Controls Backside Controls
Lens Mount Lens Mount
Card Slot/Connector Card Slot/Connector
Pressing the illumination button Pressing the illumination button
will provide high illumination will provide high illumination
for the LCD panel for the LCD panel
D2
Indicator Lamps Indicator Lamps
Wi-Fi Wi-Fi
GPS GPS
Self-timer Self-timer
Remote Control Remote Control