Summary of Contents for BIOS Diagnostics 200SC
- Page 1 PROFESSIONAL Office Scale 3-in-1 Body Analysis Scale (Weight/Height/BMI) Instruction Manual Model: 200SC...
-
Page 2: Table Of Contents
Instruction Manual Table of Contents 1. Introduction 1.1 Features 1.2 General Warnings and Cautions 2. Getting Started 2.1 About the 200SC 2.2 About the LCD Screen 2.3 About the Buttons 3. Initial Setup 3.1 List of Components 3.2 Installation Instructions 4. -
Page 3: Introduction
It provides quick calculations of three key body qualities – weight, height, and BMI. This manual is a comprehensive guide designed to help you understand the capabilities and operation of the 200SC Professional Office Scale. Before using this device, carefully read this manual for setup, configuration, use, troubleshooting, and maintenance of the device. -
Page 4: Getting Started
2. Getting Started 2.1 About the 200SC This section describes the various components of the Professional Office Scale. Height Sensor LCD Display LCD Display Control Buttons Master ON/OFF Switch (located on the back of the LCD Display) Platform... -
Page 5: About The Lcd Screen
2.2 About the LCD Screen cm inch BMI 1. Weight a. Shows weight displayed in pounds (lbs) or kilograms (kgs) as set by the user. 2. Stability Symbol a. Denotes when the weight measurement on the scale has stabilized. The number will no longer change. -
Page 6: About The Buttons
i. Underweight – BMI less than 18.5 ii. Normal Weight – BMI 18.5 – 24.9 iii. Overweight – BMI 25 – 29.9 iv. Obese – BMI 30 + NOTE: BMI is a ratio of weight-to-height. The calculation to determine BMI = kg/m2 (a person’s weight in kilograms divided by their height in metres squared). -
Page 7: Initial Setup
b. When setting parameters, use this button to decrease the selection. c. When in the query/memory parameter, use this button to decrease the selection. 3. SET Button a. When the scale is turned ON, use this button to toggle through the gender, and age parameters. -
Page 9: Installation Instructions
3.2 Installation Instructions 1. Remove all components from the box, and lay out for easy access. 2. Starting with the 3 column pieces (B/C/D), align, and connect the bottom of column C (the column piece with the LCD screen), to the top of column B. NOTE: Ensure that the wiring from column C is thread down through column B before screwing them together. -
Page 10: Taking Measurements With Parameters Set Up
3. Have patient stand in the center of the platform, standing up straight, and looking ahead. NOTE: Make sure patient stands still, and remains on the platform until the numbers have stopped changing on the screen. 4. Turn the LCD screen OFF by pressing the OFF button when finished noting down measurements. -
Page 11: Charging The Battery
NOTE: The LCD screen should be rotated back 90° if the patient is under 3’11”/120 cm in height, so as to not interfere with the height calculation. 4.4 Charging the Battery When the LCD display shows , please be sure to charge the scale in a timely manner. -
Page 12: Specifications
19”(D) x 14”(W) x 87”(H) 7. Limited Lifetime Warranty The BIOS Diagnostics Professional Office Scale has a limited lifetime warranty to be free of manufacturing defects in materials and workmanship under normal applications of the original owner. If this product becomes inoperable due to defect, return the product with all component pieces and proof of purchase to the address listed below. - Page 13 Ship the unit prepaid and insured (at owner’s option) to: Thermor Ltd. Attn: Returns Department 16975 Leslie Street Newmarket, ON L3Y 9A1 www.biosmedical.com Email: support@biosmedical.com...
Need help?
Do you have a question about the 200SC and is the answer not in the manual?
Questions and answers