Last updated: January 19, 2023 05:58. Revision #10726 Thank you for purchasing this Cambridge Audio Minx X301 subwoofer. Installed and used properly the subwoofer will deliver astonishing sound quality, whether playing music or movies, whatever the listening environment. Please read this guide carefully, as it contains essential information in getting the very best from your subwoofer.
What's included with the Minx X301? Last updated: January 19, 2023 05:58. Revision #10725 1. Minx X301 Subwoofer. 2. Installation guide. 3. Safety guide. 4. UK mains lead (depending on where the X301 was purchased) EU mains lead (depending on where the X301 was purchased) CU mains lead (depending on where the X301 was purchased)
Rear panel Last updated: January 19, 2023 05:58. Revision #10723 1. AC power socket. 2. Mains power switch – Switch the subwoofer between on and off. 3. Standby switch - Switch between ‘Force On’ (no standby), and ‘Audio Detect’. In audio detect mode the X301 will switch on when it detects an incoming signal.
Unboxing your Minx X301 Last updated: January 19, 2023 05:58. Revision #10722 Follow the diagram and take care when unboxing your Minx X301 so not to damage the speaker cone.
Installation instructions Last updated: January 19, 2023 05:59. Revision #10721 Dependent on your desired setup, there are a few different ways to connect your Minx X301 subwoofer. 1. If you are using a two-channel hi-fi system, then use the left and right line input connections to connect your Minx X301. 2.
Page 10
4. Use the crossover frequency, phase, and volume controls to adjust the subwoofer output to fit with the rest of your system, and your requirements.
Connecting a second subwoofer Last updated: January 19, 2023 05:59. Revision #10720 If you wish to connect a second subwoofer to your setup, this can be done using the line out connections on the rear of your Minx X301. Connect the line out of your X301 to the line in of a secondary subwoofer and adjust the controls accordingly to achieve your desired sound.
Technical specifications Last updated: January 19, 2023 05:59. Revision #10719 Power output 300W Drivers 1 x 8" subwoofer 1 x 8" passive radiator Speaker dimensions (H x W x D) 311 x 266 x 278mm (12.4 x 10.5 x 11”) Weight 7.5kg (16.5lbs)
Frequently asked questions Last updated: January 19, 2023 05:59. Revision #10718 What is meant by speaker sensitivity? Speaker sensitivity is the level produced by the speaker at one meter, when supplied with one watt of power from an amplifier. It’s a way of describing how well the speaker produces acoustic energy, based on a given input.
Troubleshooting Last updated: January 19, 2023 05:59. Revision #10727 No sound through subwoofer. • Check that the amplifier is turned on. • Ensure that the correct input source is selected on the amplifier. • Check that the subwoofer is turned on. •...