Belangrijke zaken: Bedankt dat u heeft gekozen voor één van onze Ocina producten. volg te alle tijde de veiligheidsvoorschriften voor veilig gebruik. Om schade door verkeerd gebruik te voorkomen, dient u de gebruiksaanwijzing zorgvuldig te lezen voordat u dit product gebruikt.
Veiligheidstips: Het belangrijkste is de veiligheid van u en anderen, daarom hebben wij in deze handleiding en op uw apparaat veel belangrijke veiligheidsberichten opgenomen. Lees altijd alle veiligheidsberichten en volg ze op. Alle veiligheidsvoorschriften volgen op het waarschuwingssymbool en het woord "GEVAAR" en "WAARSCHUWING".
Start knop: Aan/uit. IJskeuzetoets: Kies om beurten klein ijs of groot ijs. Automatische Reinigingsmodus: Houd in de stand-by modus de aan/uit-knop 5 seconden ingedrukt om de reinigingsmodus te activere3. Indicator watertekort: Controlelampje watertekort brandt. Indicator ijs vol: Het bijbehorende controlelampje brandt als het ijs vol is. Instructies voor gebruik: 1.
Page 8
6. Druk op de selectieknop voor ijsblokjes om de grootte van het ijs te kiezen. Als de kamertemperatuur lager is dan 15C, is het aanbevolen klein ijs te kiezen om te voorkomen dat het ijs aan elkaar kleeft. 7. Open de bovendeksel, neem de ijsmand eruit, voeg water toe aan het waterreservoir, houd het waterniveau onder de hoogste markering, zet de ijsmand terug en sluit het bovendeksel.
11. Als de ijsmand vol is, stopt het maken van ijs automatisch. 12. Het wordt aanbevolen het water om de 24 uur te verversen om het water schoon te houden. Als de ijsmaker lange tijd niet wordt gebruikt, laat dan het resterende water uit het reservoir lopen.
Page 10
• Open de afvoerplug zodat het water kan worden afgevoerd; • Veeg het waterreservoir schoon met een verdund schoonmaakmiddel, warm water en een zachte doek; • Voor de buitenkant van de machine moeten vaak verdunde reinigingsmiddelen en warm water worden gebruikt.
Probleemoplossing: MOGELIJKE PROBLEEM OPLOSSING OORZAAK Voeg water toe Indicatielampj Te weinig water om ijs te maken e "water toevoegen" Watertankbodem Maak schoon brandt verstopt Stop met het maken van ijs. Nadat de De cyclustijd van ijsblokjes zijn het ijs maken is te gesmolten, start u de lang ijsbereiding opnieuw en...
Important Matters: Thank you for choosing one of our Ocina products. follow the safety instructions for safe use at all times. To prevent damage from misuse, please read the instruction manual carefully before using this product. Warning: 1. When positioning the device, check that the power cord is not pinched or damaged.
Safety Tips: The most important thing is the safety of you and others, we have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. All safety messages will follow the safety alert symbol and the word "DANGER"...
Speci cations: Item no KULA-RZB12(B)-N8-1 Product size 320x230x320mm Product weight 8.2Kg Rated Voltage 220-240V 50Hz Rated Power 105W Noise 50dB Refrigerate R600a/24g Capacity of water tank 1.3L Current 0.8A Control Panel:...
Start Button: On/o . Ice Selection Button: Select small ice/large ice in turn. Automatic Cleaning Mode: In standby mode, press and hold the power button for 5 seconds enter the cleaning mode. Water Shortage Indicator: Water shortage corresponding indicator light on. Ice Full Indicator: The corresponding indicator light is on when the ice is full.
Page 17
6. Touch the ice cube selection button to select the ice size. If the room temperature is below 15C, to prevent ice linking, it is recommended that you choose small ice. 7. Open the top cover, take out the ice basket, add water to the water tank, keep the water level below the highest mark, put the ice basket back and close the top cover.
11. If the ice basket is full, the making of ice stops automatically. 12. It is recommended to change water every 24 hours to keep the water clean. If the ice maker is not used for a long time, drain the remaining water from the tank.
Page 19
• Wipe the water tank with diluted cleaners, warm water, and soft cloth. • The outside of the machine should often use diluted cleaners and warm water. • Wipe dry in a soft cloth. • Close the drain plug when the machine is not used for a long time, the water tank should be drained and dried.
Troubleshooting: PROBLEM POSSIBLE CAUSE SOLUTION Add water to Lack of Water “Add water” remake ice indicator Water tank light on Clean bottomo blocked Stop ice making. The ice making After the ice cubes cycle time is too melt, restart ice long making an select small ice.
Page 21
F-Group Made in PRC Designed in the Netherlands Bosbeemd 1, Beek en Donk...