Panasonic NA-S086M4 Series Operating Instructions Manual page 27

Cleaning the Drain Pump Filter
WARNING
• Make sure that the machine has finished the washing cycle and is empty. Switch it off
and unplug it before cleaning the drain pump filter.
• Be careful of hot water. Wait for water cooling down. Risk of scalding!
• Clean the filter periodically every 3 months to ensure the normal operation of the
appliance.
1.Open the lower cover cap
4.Open the filter by turning
to the counter clockwise
CAUTION
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap
plates should be inserted aligning to hole plates otherwise water may leak.
• Some machines don't have emergency drain hose, so step 2 and step 3 can be
skipped. Rotate lower cover cap directly to make water run into basin.
• When the appliance is in use and depending on the programme selected there can
be hot water in the pump. Never remove the pump cover during a wash cycle,
always wait until the appliance has finished the cycle, and is empty. When replacing
the cover, ensure it is securely re-tightened.
2.Rotate 90°C and pull out
the emergency drain hose,
and take off the hose cap
Emergency
drain hose
5.Remove extraneous matter 6.Close the lower cover cap
26
3.After water runs out,reset
the drain hose