Hibernation Mode - Toshiba Satellite A80-127 User Manual

Make sure the Built-in Hard Disk Drive and optical media drive are off. If
you turn off the power while a disk is being accessed, you can lose data or
damage the disk.
3. Click start and click Turn Off Computer. From the Turn Off Computer
window click Turn Off.
4. Turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.

Hibernation mode

The hibernation feature saves the contents of memory to the hard disk when
the computer is turned off. The next time the computer is turned on, the
previous state is restored. The hibernation feature does not save the status
of peripheral devices.
1. While entering Hibernation mode, the computer saves the contents of
memory to the Hard disk drive. Data will be lost if you remove the battery
or disconnect the AC adaptor before the save is completed. Wait for the
Built-in Hard Disk Drive indicator to go out.
2. Do not install or remove a memory module while the computer is in
hibernation mode. Data will be lost.
Benefits of Hibernation
The Hibernation feature provides the following benefits:
■ Saves data to the hard disk when the computer automatically shuts down
because of a low battery.
For the computer to shut down in Hibernation mode, the Hibernation feature
must be enabled in two places: the Hibernate tab in Power Options and
Setup Action tab in TOSHIBA Power Saver.
Otherwise, the computer will shut down in Standby mode. If battery power
becomes depleted, data saved in Standby will be lost.
■
You can return to your previous working environment immediately when
you turn on the computer.
■
Saves power by shutting down the system when the computer receives
no input or hardware access for the duration set by the System Hibernate
feature.
■
You can use the panel power off feature.
Starting Hibernation
You can also enable Hibernation by pressing Fn + F4. See Chapter 5, The
Keyboard, for details.
Toshiba A80
Getting Started
3-8