Table of Contents
Advertisement
Inserting a Check
NOTE:
A check with duplicate copies cannot be printed.
Use standard wallet-sized checks. (234"x6" (Max. 22»32'X61/46"))
I » Open the bottom cover by sliding the bottom cover knob to the right.
Bottom cover knob
Bottom cover
2. Insert only one check under the guide tabs until you feel some resistance.
Align the bottom edge of the check with the bottom side of the guide tab.
It is recommended that you use the sample sheet to confirm the print
positions at first.
NOTE:
Make sure that the check number corresponds to CHK# of the
data.
32au2
e Buios
E
uono
NII
How to store checks
Inside the bottom cover is a check
storage area where you can store up
to 25 separate checks. Stack them
from the smallest number check on
the top to the largest number check
on the bottom and to insert less than
12 or 13 checks at one time. This
eliminates possible errors in check
number and order.
Advertisement
Table of Contents
