Biostar B250GT6 Manual page 29

Vivid LED DJ
Vivid LED DJ can adjust your color scheme of on-board LEDs , MOSFET Heatsink LED and RGB
LED Device.
1. Normal Mode: It balances energy consumption and system performance.
2. Default: All the setting are back to default.
3. ECO Mode: It saves energy by slightly reducing system performance.
4. Sport Mode: It provides the highest level of performance
» ECO & Sport onboard buttons and LED lights will be available when running RACING GT program in
Windows environment.
» The color schemes of Normal, ECO & Sport mode can be adjusted by below setting items.
5. LED Type: Select the LED lighting blocks.
• ALL : All LED illuminations.
• SYSTEM : System LED illumination. (MOSFET Heatsink LED, on board LED)
• HEADER 1 : The hearder 1 LED illumination. (RGB LED Device)
• HEADER 2 : The hearder 2 LED illumination. (RGB LED Device)
» If you select two or more LED types, you can only select one color and one sparkling mode.
6. Auto: LEDs will automatically change the color.
7. Permanent: LEDs are constantly lit.
8. Breath: LEDs gradually flash on and off.
9. Color Palette: Allows to you choose specific color of the LEDs.
10. Shine & Music: LEDs will flash according the music played on your system.
» Please make sure your speaker or earphone is properly connected to audio jack before using RACING
GT program.
11. Shine: LEDs flash at a specific frequency.
12. Light/Dark: Allows you to adjust the LED brightness.
B250GT6 & B250GT5 & H270GT5
Chapter 3: UEFI BIOS & Software | 29