Sony Trinitron KV-27510 Operating Instructions Manual page 11

6 To erase and/or add other channels, repeat
step 5.
-
7 When you finish, press MENU.
MENU
Note
e If you erase or add a VHF or UHF channel, the cable TV
channel with the same number is also erased or added, and
vice versa.
Setting cable TV on or off
If you have connected the TV to a cable TV system, set
CABLE to ON, the factory setting. If not, set CABLE to
OFF.
You do not have to do this procedure if you execute
AUTO SET UP (page 9). Do this procedure only when
you want to set it manually.
1 Press MENU.
2 Press A+ or V- to move the cursor (P) to SET
UP and press RETURN.
3 Press A+ or V- to move the cursor (>)
to CH SET UP and press RETURN.
AUTO PROGRAM
CH _ERASE/ADD
MENU
Use > Gi Exit Ga
4 Set CABLE to ON or OFF:
(1) Make sure the cursor (P) is beside CABLE and
press RETURN. If the cursor is not beside
CABLE, press A+ or V— to move the cursor and
press RETURN.
(2) Press A+ or V— to select ON or OFF and,
(3) press RETURN.
CH SET UP
>CABLE : OFF
AUTO PR |OGRAM
CH ERASE/ADD
MENU
Use > Gi) Exit i
5 press MENU to return to the original screen.
Note
¢ If CH SET UP menu appears in black, the TV is set to a video
input and you cannot select CABLE. Press TV/VIDEO so that a
channel number appears.
Dn ee ee eH
Presetting channels
You can preset TV channels easily by using the AUTO
PROGRAM feature.
You do not have to do this procedure if you execute
AUTO SET UP (page 9) . Do this produre only when
you want to set it manually.
1 Press MENU.
2 Press A+ or V— to move the cursor (>)
to SET UP and press RETURN.
3 Press A+ or V- to move the cursor (>)
to CH SET UP and press RETURN.
CH SET UP
»CABLE : ON
AUTO PROGRAM
CH ERASE/ ADD
MENU
Use ¢ Gi Exit i@
4 Press A+ or V- to move the cursor (>)
to AUTO PROGRAM and press RETURN.
AUTO PROGRAM
"AUTO PROGRAM" appears on the screen and the
TV starts scanning and presetting channels
automatically. When all the receivable channels are
stored, "AUTO PROGRAM" disappears and the
lowest numbered channel is displayed.
5 press MENU to return to the original screen.
Note
e If the CH SET UP menu appears in black, the TV is set toa
video input and you cannot select AUTO PROGRAM. Press
TV/VIDEO or TV so that a channel number appears.
Getting Started| 11