Advertisement

Quick Links

It's Under Control
®

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications
Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any
changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received including interference that may cause undesired operation.

Industry Canada Compliance Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received including interference that may cause undesired operation.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions
suivantes:
1.
Ce dispositif ne peut causer des interférences nuisibles.
2.
Cet appareil doit accepter toute interférence reçue y compris des interférences qui peuvent provoquer un fonctionnement indésirable.

DECLARATION OF CONFORMITY (DOC)

The Declaration of Conformity for this product can be found on the RTI website www.rticontrol.com/declaration-of-conformity

Safety Suggestions

Read and Follow Instructions. Read all safety and operating instructions before operating the unit.
Retain Instructions. Keep the safety and operating instructions for future reference.
Heed Warnings. Adhere to all warnings on the unit and in the operating instructions.
Heat. Keep the unit away from heat sources such as radiators, heat registers, stoves, etc., including amplifiers that produce heat.
Power Sources. Use only power sources of the type described in the operating instructions, or as marked on the unit.
Water and Moisture. Do not use the unit near water—for example, near a sink, in a wet basement, near a swimming pool, near an open window, etc.
Object and Liquid Entry. Do not allow objects to fall or liquids to be spilled into the enclosure through openings.
Servicing. Do not attempt any service beyond that described in the operating instructions. Refer all other service needs to qualified service
personnel.
Damage Requiring Service. The unit should be serviced by qualified service personnel when:
Objects have fallen or liquid has been spilled into the unit.
The unit has been exposed to rain.
The unit does not appear to operate normally or exhibits a marked change in performance.
The unit has been dropped or the enclosure has been damaged.

Limited Warranty

RTI warrants its products for a period of three (3) years (one year for included battery packs); or for a period of time compliant with local laws when
applicable from the date of purchase from RTI or an authorized RTI distributor.
This warranty may be enforced by the original purchaser and subsequent owners during the warranty period, so long as the original dated sales
receipt or other proof of warranty coverage is presented when warranty service is required.
Except as specified below, this warranty covers all defects in material and workmanship in this product. The following are not covered by the
warranty:
Damage resulting from:
1.
Accident, misuse, abuse, or neglect.
2.
Failure to follow instructions contained in this Guide.
3.
Repair or attempted repair by anyone other than Remote Technologies Incorporated.
4.
Failure to perform recommended periodic maintenance.
5.
Causes other than product defects, including lack of skill, competence or experience of user.
6.
Shipment of this product (claims must be made to the carrier).
7.
Being altered or which the serial number has been defaced, modified or removed.
Service & Support
Contacting RTI
For news about the latest updates, new product
If you are encountering any problems or have a question about your RTI product, please
information, and new accessories, please visit our
contact RTI Technical Support for assistance (see the Contacting RTI section of this guide for
contact details).
web site at: www.rticontrol.com
RTI provides technical support by telephone or e-mail. For the highest quality service, please
have the following information ready, or provide it in your e-mail.
For general information, contact RTI at:
Remote Technologies Incorporated
5775 12th Ave. E Suite 180
Shakopee, MN 55379
Tel. (952) 253-3100
info@rticontrol.com
If you are having a problem with hardware, please note the equipment in your system, a
description of the problem, and any troubleshooting you have already tried.
Please do not return products to RTI without a return authorization.
Your Name
Company Name
Telephone Number
E-mail Address
Product model and serial number (if applicable)
Connecting Block
Reference Guide
The CB-8 is an installation accessory designed to provide convenient and reliable
power connections for up to eight (8) RTI in-wall keypads*, touchpanels and other
devices. In addition to providing power, the CB-8 combines and routes the infrared
outputs from the touchpanels to a single output for connection to an RTI control
processor. Multiple CB-8 units can be daisy-chained for connecting more than eight
devices. A 12VDC 4.0Amp power supply is included.

Key Features

The CB-8 provides superior quality and reliability as well as these specific features:
Provides power connections for up to eight (8) RTI devices*.
Combines and routes infrared outputs from touchpanels to a single output.
Enables communication between RTI Control Processors and devices via RS-485.
Multiple CB-8 units can be daisy-chained.
Standard RJ45 ports for easy connection of touchpanels.
* NOTE: Maximum number depends on keypad model.
Copyright © 2022 • Remote Technologies Incorporated • All rights reserved.
CB-8
70-210044-18 V1.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CB-8 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for RTI CB-8

  • Page 1 Limited Warranty RTI warrants its products for a period of three (3) years (one year for included battery packs); or for a period of time compliant with local laws when The CB-8 is an installation accessory designed to provide convenient and reliable applicable from the date of purchase from RTI or an authorized RTI distributor.
  • Page 2 Enclosure Formed steel, black power coating Do not let the CB-8 get wet. It should not be handled with wet hands or placed in an 5 in. x 9.4 in. x 1 in. area where it could get wet.

Table of Contents