AEG COMPETENCE 32081 B Operating Instructions Manual page 17

BEA806 10/96 UK
1. Turn cooking function selector A to the required temperature.
2. Set the temperature with temperature selector B.
The oven pilot light will illuminate when the oven is switched on.
The oven thermostat control light will illuminate while the oven is heating up and will cycle on
and off, when the pre-selected temperature has been reached. it will continue to cycle on
and off to show that the set temperature is being maintained.
Pre-Heating
In general it is not necessary to pre-heat the oven when using Ventitherm roasting. However,
if pre-heating is required select the required temperature for the oven. When the oven has
reached the pre-selected temperature the thermostat control light D will go out.
17